Sony TDM-NC1 User Manual download pdf (Page 17)

17

GB

Case A: Wired connection

1 Connect the unit to the network using a

wired connection.

Connect the unit to your router (hub) or

directly to the LAN port of the computer.

Use the network cable (not supplied).

Check that the WIRELESS/WIRED

selector on the unit is set to WIRED.

Notes

• When using the unit with a fixed IP address,

refer to “Advanced Network Settings”

(page 31).

• When connecting the unit to the computer

directly, set the IP address of computer to

“Automatic Private IP Addressing”. After

turning on the computer, “Configuring” appears

in the unit display window for a few minutes.

• In some cases, a message indicating that the

connection is limited, or not available, will

appear in the lower right portion of the

computer; however, the unit will operate

normally.

2 Turn on the AV system, and set the AV

system’s function to DMPORT.

3 Go to STEP 8 (page 20).

Case B: Wireless connection

(setting up by the unit)

1 Set the WIRELESS/WIRED selector on

the unit to WIRELESS.

2 Turn on the AV system, and set the AV

system’s function to DMPORT.

3 Confirm the settings of your wireless

system.

Check the following items of your wireless

LAN router to set the same information for

the TDM-NC1.

SSID (Wireless Network Name):

________________________________________

If your wireless LAN router security is

enabled,

Wireless Network Key:

__________________

Tips

• For details on how to check the wireless LAN

router settings, refer to the operation manual of

your wireless LAN router.

• In some case, SSID name and wireless network

key numbers/characters are often written on the

wireless LAN router.

• Check that your wireless LAN router uses the

latest firmware version. For details, refer to the

operation manual of your wireless LAN router.

4 Press MENU.

5 Press . or > repeatedly until “Wi-

Fi SETUP?” appears in the unit display

window, then press ENTER.

“SSID?” appears.

6 Press ENTER.

“Searching” appears.

7 Press . or > repeatedly until your

wireless LAN router SSID name

appears, then press ENTER.

If you set the wireless network key in the

wireless LAN setting, “KEY?” appears.

Press ENTER.

If you do not set the wireless network key,

the unit restarts, go to STEP 8 (page 20).

WIRELESS

WIRED

Network cable

(not supplied)

To router (hub)

or LAN port of

the computer

To LAN port

WIRELESS/

WIRED selector

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 466 467

Comments to this Manuals

No comments