Sony RM-X7BT User Manual download pdf (Page 8)

8GB

 To prevent making unnecessary

hole or attaching tape to an

unsuitable site of the car, install

the remote commander and

adaptor to a site where they can

definitely send and receive the

IR signal.

Note

Be careful to do not damage cables

and other items in the car when

making a hole on the car or

tightening the screw.

1 Make a hole with a diameter

of 2 mm on the installation

site of your car.

2 Peel the tape on the bottom

of the holder  and attach it

on the installation site.

Fix the hole of the holder  on

the hole of the car.

3 Install the supplied screw 

to the hole of the holder 

and secure it to the

installation site.

4 Set the remote commander

with the lithium battery to the

holder .

Insert the groove of the

remote commander in the

hook of the holder , and

push the remote commander

until it clicks.

To remove the remote

commander

1 Pull the remote commander

while pressing holder release

buttons on both sides of the

holder  at the same to

remove from the holder .

Groove

Hooks



1 2 3 4 5 6 7 8 9 10 11 12 13 ... 135 136

Comments to this Manuals

No comments