Sony NAS-SC500PK User Manual download pdf (Page 2)

NAS-SC500PK.GB.4-133-407-12(1)

Connecting the supplied devices over a wireless network

(Instant (S-IWS) connection)

 Turn on the wireless station.

 Connect the “GIGA JUKE” Music Server and the wireless station.

 Make sure that the operation mode switch on the wireless station is set to “AUTO” (factory

setting).

 Use the 5V AC power adaptor (supplied with the wireless station) to connect the wireless

station to a wall outlet.

 Confirm that the POWER indicator is lit.

Wait until the INSTANT indicator lights up and the AOSS indicator turns off. (This may take several

minutes.)

 Connect the wireless adaptor to the USB port on the “GIGA JUKE” Music Server using the

wireless adaptor extension cable (supplied with the “GIGA JUKE” Music Server).

 Connect the power cord of the “GIGA JUKE” Music Server to a wall outlet.

The “GIGA JUKE” Music Server automatically turns on, makes the initial settings, and then turns off.

(This may take several minutes.)

When the clock setting display appears, set the clock (refer to “Setting the clock” on page 29 in the

Operating Instructions).

Note

Do not disconnect the power cord while the initial setup is in progress. Doing so may cause the “GIGA JUKE” Music Server

to malfunction.

 Press  (power) to turn on the “GIGA JUKE” Music Server.

When the connection has completed, a pop-up window appears in the top left part of the display to show

the network connection status.

Tip

The language displayed on the screen depends on the language that is set on the “GIGA JUKE” Music Server. For details on

the display language setting, refer to the Operating Instructions.

 Connect the “GIGA JUKE” Wireless Player and the wireless station.

 Use the 12V AC power adaptor (supplied with the “GIGA JUKE” Wireless Player) to connect the

“GIGA JUKE” Wireless Player to a wall outlet.

When the clock setting display appears, set the clock (refer to “Setting the clock” on page 31 in the

Operating Instructions).

 Press  (power) to turn on the “GIGA JUKE” Wireless Player.

Tip

The language displayed on the screen depends on the language that is set on the “GIGA JUKE” Wireless Player. For details

on the display language setting, refer to the Operating Instructions.

 When “Instant (S-IWS) setting with wireless station is completed.” appears, press / to

select [OK] and press ENTER.

The name of the “GIGA JUKE” Music Server (e.g., “NAS-S500HDE”)

appears in the server selection display.

If the name of the “GIGA JUKE” Music Server does not appear, press



to select [Update info] and press ENTER.

Connecting the devices supplied in this package over a wireless network through

Instant (S-IWS)*

connection allows you to listen audio data stored on the “GIGA

JUKE” Music Server through the speakers of the “GIGA JUKE” Wireless Player in a

different room.

Instant (S-IWS) (Sony Instant Wireless Audio Setup) is a function that automatically sets up a

wireless network and connects the devices when they are turned on.

Note

Instant (S-IWS) connection is recommended when the network consists only of the devices supplied

with the NAS-SC500PK. If you want to set up the wireless network using a method other than Instant

(S-IWS), see “Connecting to the Internet and your computer (AOSS connection)” on the right or

refer to the “Network connection and setup” on page 98 in the Operating Instructions.

Connecting to the Internet and your computer

(AOSS connection)

If you want to use the devices in conjunction with your computer or use the “Music Transfer” software, the AOSS connection is recommended.

Note

When connecting the devices to the Internet together with a computer, the AOSS connection is recommended as it can obtain a security level higher than that of the Instant (S-IWS) connection.

Please note that using the Instant (S-IWS) connection may lower the security level of your home network.

For more information, refer to the items on

the right.

If the “GIGA JUKE” Music Server or the “GIGA JUKE” Wireless Player cannot connect to the

Internet.

Do the following operation.

1 Disconnect the 5V AC power adaptor from the wireless station, and then set the operation mode

switch on the wireless station.

When performing the Instant (S-IWS) connection:

Set the operation mode switch to “AUTO”.

When performing the AOSS connection:

Set the operation mode switch to “MODE 2”.

If the network (LAN) cable (supplied with the wireless station) is connected to the wireless station,

disconnect it.

2 Connect the wireless station to the broadband router with the network (LAN) cable (supplied with

the wireless station).

When connecting the wireless station and a broadband router, connect the network (LAN) cable to

the INTERNET port on the wireless station (see the figures in “Connecting to the Internet and your

computer (AOSS connection)” above).

3 Reconnect the 5V AC power adaptor to the wireless station and wait until the WIRELESS indicator

starts flashing.

4 Press and hold the RESET button for about 5 seconds using something with a pointed tip, such as a

small pin, and then wait until the INSTANT indicator lights up and the AOSS indicator turns off

(this may take several minutes).

If this does not occur on the wireless station, press the RESET button again.

5 If a network (LAN) cable is connected to the “GIGA JUKE” Music Server, disconnect it.

6 Connect the wireless adaptor to the USB port of the “GIGA JUKE” Music Server.

7 When performing the Instant (S-IWS) connection:

On the “GIGA JUKE” Music Server, press SETTINGS, press





to select [Network setting] –

[Auto setting], and then press ENTER.

Or, press SETTINGS, press





to select [Network setting] – [Manual setting] – [Wireless LAN

setting] – [Access point setting] – [Automatic setting: Instant (S-IWS)], and then press ENTER.

When performing the AOSS connection:

Do step  in “Connecting to the Internet and your computer (AOSS connection)” (see above).

8 When performing the Instant (S-IWS) connection:

On the “GIGA JUKE” Wireless Player, press SETTINGS, press





to select [Network setting] –

[Auto setting], and then press ENTER.

Or, press SETTINGS, press





to select [Network setting] – [Manual setting] – [Connection

setting] – [Instant (S-IWS)], and then press ENTER.

When performing an AOSS connection:

Do step  in “Connecting to the Internet and your computer (AOSS connection)” (see above).

Troubleshooting

“GIGA JUKE” Music Server “GIGA JUKE” Wireless Player

Wireless station

Wireless adaptor

This completes the connection of the devices in the package.

To use these devices in conjunction with the Internet but without connecting to your computer, do the following:

 Connect one end of the network (LAN) cable (supplied with the wireless station) to the

INTERNET port of the wireless station.

 Connect the other end of the network (LAN) cable to the broadband router that is connected

to the Internet.

Wireless station



To the

INTERNET port

Broadband router

Network (LAN) cable



To the Broadband

router

Wireless station

Broadband router

Wireless

adaptor

Computer



Operation

mode switch

(MODE 2)



To the

INTERNET

port

 “GIGA JUKE” Music Server  “GIGA JUKE” Wireless Player

 Set the Operation mode switch on the wireless station to “MODE 2”.

 Connect the network (LAN) cable (supplied with the wireless station) to the

INTERNET port of the wireless station and a broadband router.

 Perform the AOSS setup operation on the “GIGA JUKE” Music Server.

Press SETTINGS.

Press





to select [Network setting] – [Manual setting] – [Wireless LAN setting] – [Access

point setting] – [Automatic setting: AOSS], and then press ENTER.

Follow the instructions that appear in the display.

 Perform the AOSS setup operation on the “GIGA JUKE” Wireless Player.

Press SETTINGS.

Press





to select [Network setting] – [Manual setting] – [Connection setting] – [AOSS],

and then press ENTER.

Follow the instructions that appear in the display.



See the Operating Instructions for full explanations of the various settings, operations,

functions and troubleshooting for the “GIGA JUKE” Music Server, the “GIGA JUKE”

Wireless Player and the wireless station.



Go to the customer support site of Sony Europe, http://support.sony-europe.com/ (for

customers in Europe only).

If the Instant (S-IWS) connection is not possible (“Wireless LAN Instant (S-IWS) Connected.”

does not appear in the network setting display of the “GIGA JUKE” Music Server); or

If the “GIGA JUKE” Wireless Player cannot connect with the “GIGA JUKE” Music Server (the

name of your “GIGA JUKE” Music Server does not appear in the server selection display of

the “GIGA JUKE” Wireless Player).

Do the following operation.

1 Disconnect the 5V AC power adaptor from the wireless station, and then check the operation mode

switch on the wireless station is set to “AUTO”.

If the network (LAN) cable (supplied with the wireless station) is connected to the wireless station,

disconnect it.

2 Reconnect the 5V AC power adaptor to the wireless station and wait until the WIRELESS indicator

starts flashing.

3 Press and hold the RESET button for about 5 seconds using something with a pointed tip, such as a

small pin, and then wait until the INSTANT indicator lights up and the AOSS indicator turns off (this

may take several minutes).

If this does not occur on the wireless station, press the RESET button again.

4 If a network (LAN) cable is connected to the “GIGA JUKE” Music Server, disconnect it.

5 Connect the wireless adaptor to the USB port of the “GIGA JUKE” Music Server.

6 On the “GIGA JUKE” Music Server, perform the Instant (S-IWS) connection.

Press SETTINGS, press





to select [Network setting] – [Auto setting], and then press ENTER.

Or, press SETTINGS, press





to select [Network setting] – [Manual setting] – [Wireless LAN

setting] – [Access point setting] – [Automatic setting: Instant (S-IWS)] and then press ENTER.

7 On the “GIGA JUKE” Wireless Player, perform the Instant (S-IWS) connection.

Press SETTINGS, press





to select [Network setting] – [Auto setting], and then press ENTER.

Or, Press SETTINGS, press





to select [Network setting] – [Manual setting] – [Connection

setting] – [Instant (S-IWS)], and then press ENTER.

Wireless adaptor

 To the USB port To a wall outlet

 (power)

“GIGA JUKE” Music Server



POWER indicator

 To a wall outlet



Operation

mode switch

(AUTO)

Wireless station

INSTANT indicator

AOSS indicator

To a wall outlet

 To the DC IN 12V jack

 (power)

“GIGA JUKE” Wireless Player

1 2

Comments to this Manuals

No comments

Sony NAS-SC500PK User Manual Page 2

Comments to this Manuals

Related products and manuals for Unknown Sony NAS-SC500PK