Sony NAS-SC500PK User Manual download pdf (Page 1)

NAS-SC500PK.GB.4-133-407-12(1)

Checking the supplied

accessories

“GIGA JUKE” Music Server and its supplied accessories

4-133-407-12(1)

HDD Network Audio System

NAS-SC500PK

Setup Guide

Other supplied accessories

The following accessories are for common use with all the devices in the package

 Operating Instructions (1)

This manual provides full explanations of the various settings, operations and the network

connection procedure.

This manual also contains precautions for the safe use of the unit.

 Setup Guide (this manual)

Before setting up the units

Do the following operations before setting up the units.

Insert batteries into the remote control

 Slide and remove the battery

compartment lid.

 Insert two R6 (size AA) batteries

( end first) matching the

polarities.

When the remote control is no longer

able to operate the unit, replace both

batteries with new ones.

For “GIGA JUKE” Music Server

For “GIGA JUKE” Wireless Player

Prepare the Wireless Station

 Attach the stand (supplied) to the

wireless station.

The operation mode switch is factory set to

“AUTO”.

Operation

mode

switch

Tip

How to detach the speaker cords from the speaker connectors

If you want to use a different set of speaker cords, you can remove the cords from the

speaker connectors.



You can use any commercially available speaker cords of gauge AWG #18 - AWG #24.



Before attaching a new speaker cord, strip off 10 mm of its insulation and twist the bare

wires.

Push the tab on the speaker connector in the

direction of the arrow and pull out the speaker cord.

Connecting the speakers and antennas

Attach the speaker pads (supplied) to the

bottom corners of the speakers to stabilize the

speakers and to prevent them from slipping.

WARNING

DO NOT plug the power cord into a wall outlet until

the following steps  to  are completed.

 Connect the speaker cords to the speakers and the unit.

Insert the red-line end to the + terminal.

 On the speakers

 On the unit

 Connect the AM loop antenna.

 On the unit

 Connect the FM wire antenna.

 When using an external antenna On the unit

External

antenna

 Connect the DAB antenna (for the UK model only).

DAB wire

antenna

 “GIGA JUKE” Music Server

NAS-S500HDE (1)

 Wireless adaptor

UWA-NA1 (1)

 Wireless adaptor

extension cable (1)

 Speaker codes (2)

Speaker cords can be replaced with other cords

of your choice (see “How to detach the speaker

cords from the speaker connectors”)

 Speaker pads (8)

 AM loop antenna (1)

 FM wire antenna (1)  DAB wire antenna (1)

(for the UK model only)

 Remote control (1)

 R6 (size AA) batteries (2)  Oval attachments for “WALKMAN” (2)

For details on the “WALKMAN” models that are

compatible with each oval attachment for “WALKMAN”

and on installing the oval attachment for “WALKMAN”

onto the unit, refer to the Operating Instructions.

Type A attachment Type B attachment



The attachment type (A or B) is indicated on the bottom

of the attachment.

“GIGA JUKE” Wireless Player and its supplied accessories

 “GIGA JUKE” Wireless

Player NAS-C5E (1)

 Remote control (1)

 R6 (size AA) batteries (2)

 12V AC power adaptor (1)  Power cord (1)

The supplied power cord comes with an attached clamp

filter. This power cord is designed for exclusive use with

the NAS-C5E only.

For models except the UK model For the UK model

 “Internet Radio service on “GIGA JUKE” Wireless Player” leaflet (1)

Wireless station and its supplied accessories

 Wireless station

WAP-NA1 (1)

 Wireless station

stand (1)

 5V AC power

adaptor (1)

 Power cord (1)

For models except the UK model For the UK model

“GIGA JUKE” Multi-room Package

 Connect the speaker cords to the speakers.

Make sure the metal leads (not the part covered with vinyl insulation) are securely inserted.

 Connect the speaker cords to the unit.

Make sure the connectors at the end of the speaker cords are correctly aligned with the projections

in the SPEAKER terminals on the unit, and then insert the connectors into the terminals.

Make sure that the speaker cords are firmly connected to the +/– terminals on the speakers and to

the SPEAKER terminals on the unit.

To ensure good reception, keep the antenna away from the unit or any other nearby metal or

electrical devices (such as AV equipment).

When using the unit in an area with poor reception, connect an external antenna with a

commercially available 75  coaxial cable.

With a commercially available DAB external antenna, you can enjoy more robust DAB reception. It

is recommended that you use the supplied DAB wire antenna in areas with strong reception only.

75  coaxial cable with an F male type connector will be needed to install a DAB external antenna.

 Network (LAN) cable (1)

 CD-ROM containing

the “Music Transfer” PC

software (1)

Do not play this disc on an

audio CD player.

1 2

Summary of Contents

Page 1 - Setup Guide

NAS-SC500PK.GB.4-133-407-12(1)NAS-SC500PK.GB.4-133-407-12(1)1 Checking the supplied accessories“GIGA JUKE” Music Server and its supplied accessories©

Page 2 - (AOSS connection)

NAS-SC500PK.GB.4-133-407-12(1)NAS-SC500PK.GB.4-133-407-12(1)3 Connecting the supplied devices over a wireless network (Instant (S-IWS) connection) T

Sony NAS-SC500PK User Manual Page 1

Browse online or download User Manual for Unknown Sony NAS-SC500PK. Sony NAS-SC500PK Quick start guide

Summary of Contents

More documents for Unknown Sony NAS-SC500PK

Comments to this Manuals

Sony NAS-SC500PK User Manual Page 1

Browse online or download User Manual for Unknown Sony NAS-SC500PK. Sony NAS-SC500PK Quick start guide

Summary of Contents

More documents for Unknown Sony NAS-SC500PK

Comments to this Manuals

Related products and manuals for Unknown Sony NAS-SC500PK