Sony CPD-15SF2 User Manual download pdf (Page 7)

Entering New Timings

Setteing the color temperature

The selected color temperature becomes the common setting

for all input signals.

1 Press COLOR button.

The “COLOR TEMPERATURE” OSD appears.

2 Adjust with the ¨ ?// and > >/. buttons.

To select 5000K or 9300K

Press ¨ ?// buttons.

The selected color temperature is indicated in yellow.

? . . . to select 5000K

/ . . . to select 9300K

To obtain the desired color temperature between 5000K

and 9300K

Press > >/. buttons.

> . . . for higher temperature

. . . . for lower temperature

Your most recent adjusted color temperature will be

recalled by pressing > >/. button.

To erase the “COLOR TEMPERATURE” OSD, press the

COLOR button again.

The “COLOR TEMPERATURE” OSD automatically

disappears 20 seconds after you release the buttons.

When using a video mode that is not one of the 6 factory

preset modes, some fine tuning may be required to optimize

the display to your preferences. Simply adjust the monitor

according to the preceding adjustment instructions. The

adjustments will be stored automatically and recalled

whenever that mode is used.

A total of 10 user-defined modes can be stored in memory.

If the 11th mode is entered, it will replace the first.

Power Saving Function

This monitor meets the power saving guidelines set by the

EPA Energy Star Program as well as the more stringent

NUTEK 803299 (TCO92) guidelines. It is capable of reduced

power consumption when used with a computer equipped

with Display Power Management Signaling (DPMS). By

sensing the absence of the sync signal coming from the

computer, it will reduce the power consumption as follows:

CAUTION: The Power Saving function will automatically

put the monitor into Active-off state if the power

switch is turned on without any video signal

input. Once the horizontal and vertical syncs are

sensed, the monitor will automatically return to

its Normal operation state.

State

Normal

operation

Suspend

(1st step of

power saving)

Active-off

(2nd step of

power saving)

Power

consumption

100%

approx.

10%

CPD-15SF2:

approx. 7%

CPD-17SF2:

approx. 6%

Required

resumption

time

—

approx.

3 sec.

approx.

10 sec.

u Power

indicator

green on

off

POWER

SAVING

indicator

off

orange on

COLOR

COLOR TEMPERATURE

VAR I ABLE

5000K 9300K

Resetting

• Press the RESET button to recall the factory settings for

brightness, contrast, horizontal and vertical size, center

and pincushion for the mode currently in use.

• Press and hold the RESET button for 2 seconds to recall

factory setting for all adjustments in all modes.

RESET

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Comments to this Manuals

No comments

Sony CPD-15SF2 User Manual Page 7

Comments to this Manuals

Related products and manuals for TVs & monitors Sony CPD-15SF2