Sony STR-DB1070 User Manual download pdf (Page 39)

Receiving Broadcasts

5 If you’ve tuned in an AM station, adjust

the direction of the AM loop antenna for

optimum reception.

6 Repeat steps 2 to 5 to receive another

station.

Tip

• If you do not remember the precise frequency, press

TUNING + or TUNING – after entering the value

close to the frequency you want. The receiver

automatically tunes in the station you want. If the

frequency seems to be higher than the entered

value, press TUNING +, and if the frequency seems

to be lower than the entered value, press

TUNING –.

• If “STEREO” flashes in the display and the FM

stereo reception is poor, press FM MODE to

improve the sound. You will not be able to enjoy

the stereo effect, but the sound will be less

distorted.

Note

If “STEREO” does not appear at all when an FM

broadcast is received normally, press FM MODE to

turn on the “STEREO” indication.

The tuning scale for direct tuning differs depending

on the area code as shown in the following table. For

details on area codes, see page 4.

Area code FM AM

U, CA 100 kHz 10 kHz*

AU, CN, SP, CEL 50 kHz 9 kHz

E 50 kHz 9 kHz*

* The AM tuning scale can be changed (see page 53).

Automatic tuning

If you don’t know the frequency of the station

you want, you can let the receiver scan all

available stations in your area.

1 Rotate FUNCTION to select TUNER.

The last received station is tuned in.

2 Press FM/AM to select the FM or AM

band.

3 Press TUNING + or TUNING –.

Press TUNING + to scan from low to high;

press TUNING – to scan from high to low.

The receiver stops scanning whenever a

station is received.

When the receiver reaches either end of

the band

Scanning is repeated in the same direction.

4 To continue scanning, press TUNING +

or TUNING – again.

Preset tuning

After you have tuned in stations using Direct

Tuning or Automatic Tuning, you can preset

them to the receiver. Then you can tune in any

of the stations directly by entering its

2-character preset code using the supplied

remote. Up to 30 FM or AM stations can be

preset. The receiver will also scan all the

stations that you have preset.

Before tuning to preset stations, be sure to

preset them by performing steps on “Presetting

radio stations” (page 40).

continued

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 67 68

Comments to this Manuals

No comments

Sony STR-DB1070 User Manual Page 39

Comments to this Manuals

Related products and manuals for Supplementary music equipment Sony STR-DB1070