Sony NW-HD1 User Manual download pdf (Page 8)

Preparing a Power

Source

Charge the built-in lithium-ion rechargeable

battery before using it for the ﬁ rst time or

when it is depleted.

1

Slide the BUILT-IN BATTERY switch

to ON.

The protection for the built-in

rechargeable battery is released and power

is supplied to the player. Keep the switch

to ON position.

2

Connect the USB cradle to the AC

power adaptor.

Connect the DC plug of the AC power

adaptor to the DC IN jack of the USB

cradle, and then connect the AC plug to a

wall outlet.





to an AC outlet

AC power

adaptor

to DC IN

jack

USB cradle

3

Place the player on the USB cradle.

Insert the player as shown below until it

clicks into place.

Charging of the battery starts. The CHG

lamp lights up on the USB cradle, and if

the player is on, the battery indicator in

the display changes.

USB cradle connector

(on the bottom of the

player)

CHG lamp

USB cradle

Charging is completed and the CHG lamp

goes off in approximately 3 hours*. The

lighting mark lights up in the display if

the player is on. When the player display

is off, it takes approximately 1 hour* to

charge up to 80%.

* This is the approximate charging time for

an empty battery charged under a room

temperature. When the player display is on, it

takes approximately 6 hours to charge up to

80%. The charging time will differ depending

on the remaining power and battery condition.

If the battery is charged in a low-temperature

environment, the charging time will be longer.

8

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 45 46

Comments to this Manuals

No comments