Sony SNC-VL10P User Manual download pdf (Page 11)

Monitoring the Image from the Camera

Focus Area

Use this function to focus on a portion of the monitor

image by masking over the other portion. The focused

portion is called “forcus area.” By masking the image,

the transmitting data size reduces and a higher frame

rate is obtained.

New Area

To determine a new focus area on the image, click New

Area. Then left-click on the upper-left corner of the

focus area you want set, and left-click again on the

lower-right corner of the focus area. A new focus area

is now set.

Enable Area

Click Enable Area to show the check mark to enable the

focus area and mask over the non-focus area.

Disable Area

Click Disable Area to show the check mark to remove

the masking and resume the normal image.

Masking Level

Selects the masking level from Level 1 to Level 5. A

higher masking level gives a larger masking density and

higher frame rate.

Note

Some of the focus area functions might not be operative

depending on the viewer in use.

Image Quality

Selects the image quality from Level 0 to Level 9. A

higher level gives a higher quality image but the frame

rate becomes lower.

Note

Image Quality does not appear in the menu when you

view the monitor image using the Firewall viewer.

Capture

When you click Capture, the monitor image freezes and

the “Saving” dialog appears. Type the file name, select

the file format, specify the destination to which the file

is to be stored, and click Save.

This function is the same as when you click the Capture

icon on the image control section. (See “Capturing the

monitor image” on page 10.)

Note

Capture does not appear in the menu when you view the

monitor image using the Java Applet viewer.

Focus area

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 30 31

Comments to this Manuals

No comments

Sony SNC-VL10P User Manual Page 11

Comments to this Manuals

Related products and manuals for Security cameras Sony SNC-VL10P