Sony SNC-VL10P User Manual download pdf (Page 18)

Configuring the Network — Network Setting Page

xDSL Interface

This menu is displayed when Select Network Interface

is set to xDSL.

For setting the items in the LAN menu, see “LAN” on

page 17.

Network Type

Displays the protocol being used for the xDSL

connection or PPPoE (Point-to-Point Protocol over

Ethernet).

MAC Address

Displays the MAC address of the camera.

User ID

Type the user ID for Internet connection.

Password

Type the password for Internet connection.

Apply/Cancel/Help

See “Buttons common to every setting page” on page

14.

PSTN Interface

This menu is displayed when Select Network Interface

is set to PSTN.

For setting the items in the LAN menu, see “LAN” on

page 17.

MAC Address

Displays the MAC address of the camera.

User ID

Type the user ID for Internet connection.

Password

Type the password for Internet connection.

Phone Number

Type the telephone number of the ISP access point.

Connection Timeout For Idle Traffic

Type the duration (in seconds) so that the telephone line

is disconnected automatically if there is no data

communication during the specified duration.

Dial Tone

Select the dialing type of the telephone line: Tone or

Pulse.

Script Enable

Sets if a specified script is required for logging in or not.

Select Enable when you use a script; Disable when you

do not use it.

Select the login script from the drop-down list: End,

Wait For, Wait For Prompt, Send, Send CR, Send

User ID, Send Password or Delay, and type a required

script in the box on the right.

Apply/Cancel/Help

See “Buttons common to every setting page” on page

14.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 30 31

Comments to this Manuals

No comments

Sony SNC-VL10P User Manual Page 18

Comments to this Manuals

Related products and manuals for Security cameras Sony SNC-VL10P