Sony UNIOPL7T2 Operations Instructions download pdf (Page 14)

How - to Clean a Dome Bubble

To effectively clean your video surveillance dome bubble (acrylic or

polycarbonate) from debris, follow these simple step-by-step instructions.

Materials Needed

• Clean, dry, pressurized air

• Water

• High quality soft paper towel

• Isopropyl alcohol (rubbing alcohol)

• Scratch-resistant cloth

Cleaning Dome Exterior

1. When cleaning exterior of dome, make sure bubble i

s connected

securely to the camera housing.

2. While utilizing a nonabrasive cloth and cleaning agent, safe for use

on acrylic or polycarbonate plastic, in a spiral motion, gently clean

exterior of bubble.

3. Dry immediately with dry, pressurized air to prevent water spots.

1. Safely remove the dome bubble from the camera housing. To

prevent scratches or additional imperfections, utilize a scra

tch-

resistant cloth when handling the bubble.

2. Once removed, carefully place the bubble on a clean surface, safe

from dust and any other foreign debris. Do not place the bubble

face down on its curved surface.

3. While holding onto the bubble, use clean, dry, pressurized air to

gently blow off all loose particles. For more thorough cleaning, try

one of the following:

i. Rinse bubble with water

and immediately dry with

pressurized air to prevent water spots

ii. Roll a section of high-quality paper towel into a tube,

and tear tube in half. Wet torn edge with rubbing

alcohol solution (75% alcohol & 25% water). While

holding the bubble facing downward, wipe the interior

with the paper towel tube in a circular motion from the

outside – in. Use spiraling motions when cleaning.

Repeat abo

ve steps to clean entire bubble.

Cleaning Dome Interior

1 2 ... 9 10 11 12 13 14 15 16 17

No comments

Sony UNIOPL7T2 Operations Instructions Page 14