Sony STR-DA5ES User Manual download pdf (Page 46)

46

Other Operations

Naming preset stations

and program sources

You can enter a name of up to 8 characters for

preset stations and program sources. These

names (for example, “VHS”) appear in the

receiver’s display when a station or program

source is selected. Note that no more than one

name can be entered for each preset station or

program source.

This function is useful for distinguishing

components of the same kind. For example,

two VCRs can be specified as “VHS” and

“8mm”, respectively. It is also handy for

identifying components connected to jacks

meant for another type of component, for

example, a second CD player connected to the

MD/DAT jacks.

Besides, you can change the names of the

sound fields up to 18 characters.

1 To name a preset station

Rotate FUNCTION to select TUNER,

then tune in the preset station you want

to create an index name for.

The last station you received is tuned in.

If you are not familiar with how to tune in

preset stations, see “Tuning to preset

stations” on page 45.

To name a program source

Select the program source (component)

to be named.

To change the name of the sound

field

Select the sound field you want to

change the name.

2 Press NAME once to index preset

stations and program sources, press

NAME twice to change the name of the

sound field.

3 Create an index name by using the jog

dial and cursor buttons:

Turn the jog dial to select a character, then

press

to move the cursor to the next

position.

To insert a space

Turn the jog dial until a blank space appears

in the display .

If you’ve made a mistake

Press or repeatedly until the character

to be changed flashes, then turn the jog dial

to select the right character.

4 Press ENTER.

5 Repeat steps 2 to 4 to assign index

name for another station or program

source.

Recording

Before you begin, make sure you’ve connected

all components properly.

Recording on an audio tape

or MiniDisc

You can record on a cassette tape or MiniDisc

using the receiver. See the operating

instructions of your cassette deck or MD deck

if you need help.

1 Select the component to be recorded.

2 Prepare the component for playing.

For example, insert a CD into the CD

player.

3 Insert a blank tape or MD into the

recording deck and adjust the

recording level, if necessary.

4 Start recording on the recording deck,

then start playback on the playback

component.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 95 96

Comments to this Manuals

No comments