Sony STR-DA5700ES User Manual Page 81

  • Download
  • Add to my manuals
  • Print
  • Page
    / 155
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 80
81
US
Using Multi-zone Features
Setting the speakers in
zone 2
When the speakers in zone 2 are connected to
the SURROUND BACK (ZONE 2) terminals
of the receiver (page 78), make the setting so
that the sound selected in zone 2 is output from
the speakers connected to the SURROUND
BACK (ZONE 2) terminals.
For details, see “Speaker Connection” in the
Speaker Settings menu (page 104).
You can set the volume control for the ZONE
2 AUDIO OUT jacks variable or fixed.
1 Select “Settings” from the
home menu, then press .
2 Select “Zone Settings,” then
press .
3 Select “Zone Setup,” then press
.
4 Select “Line Out” for “Zone2,
then press .
5 Select the parameter you want,
then press .
Switching the zone
setting of the remote
control
The remote control is initially set to be used in
zone 2. If you want to use it in zone 3, switch
the zone setting of the remote control.
1 Press ?/1 while pressing RM
SET UP.
The AMP and ZONE buttons flash.
2 Press ZONE.
The AMP button goes off, the ZONE
button keeps flashing and the SHIFT
button lights up.
3 Press the numeric button 2 for
the zone 2, or 3 for the zone 3
while the ZONE button is
flashing.
The ZONE button lights up.
Set the volume control for
zone 2
Parameter Explanation
Variable The volume control is set to
–40 dB initially.
When you select this
parameter, the volume for
the ZONE 2 AUDIO OUT
and the SURROUND
BACK (ZONE 2) terminals
can be changed in
conjunction with each other.
Recommended when using
a power amplifier.
Fixed The volume control is fixed
to ±0 dB. Recommended
when using an equipment
with the variable volume
control.
Parameter Explanation
ZONE
AMP
2, 3
ENT/
MEM
RM SET
UP
?/1
SHIFT
continued
Page view 80
1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 154 155

Comments to this Manuals

No comments