Sony STR-DA1ES User Manual download pdf (Page 23)

Getting Started

6: Adjusting the speaker

levels and balance

(TEST TONE)

Adjust the speaker levels and balance while

listening the test tone from your listening

position. Use the remote for the operation.

Tip

The receiver employs a test tone with a frequency

centered at 800 Hz.

1 Press ?/1 on the remote to turn on the

receiver.

2 Press TEST TONE on the remote.

“T.TONE” appears in the display and the

test tone is output from each speaker in

sequence.

3 Adjust the speaker level and balance

using the LEVEL menu so that the level

of the test tone sounds the same from

each speaker.

Tips

• To adjust the level of all speakers at the same

time, press MASTER VOL +/– on the remote or

turn MASTER VOLUME on the receiver.

• You can use the jog dial on the receiver only for

the adjustment.

4 Press TEST TONE again after

adjustment.

The test tone turns off.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 63 64

No comments

Sony STR-DA1ES User Manual Page 23