Sony STR-AV910 User Manual download pdf (Page 7)

Connecting the FM Antenna

STR-AV910/710

For normal use

For higher quality sound

STRAV1010

75<ohm coaxial cable connection

A 7S^hm coaxial cable is free from external Interference,

reduces noise pickup, and is the ideal transmission line for

most FM installations. 3C-2V cable is recommended.

Connect the 75^hm coaxial cable to the supplied antenna

connector and connect it to the FM antenna connector.

O Open the lid. 9 Strip the cable.

8{“/n)10(“/j2)mm(in.)

O Bemove the ring.

(Keep it in the projection on the lid.)

o Loosen the screws

and insert the cable

Coil the center conductor

O Snap the cover into place.

0 Connecting the AM Antenna

Supplied AM antenna

For areas «with difficult AM reception

In areas with troubled reception, connect a 6- to 15-meter

(20- to SO-foot) insulated wire to the AM antenna terminal.

Extend this out of doors if possible, keeping the geater

portion horizontal.

(There Is no need to disconnect the supplied antenna)

STR-AV910f710

To prevent hum, connect the ground wire to ANTENNA ground terminal (j,).

When an outdoor antenna is installed, be sure to connect the ground wire for lightning protection.

1 2 3 4 5 6 7 8 9 10 11 12 ... 38 39

No comments

Sony STR-AV910 User Manual Page 7