Sony VPL-FE110U User Manual download pdf (Page 35)

Setting the Index Numbers

Ten’s digit Unit’s digit

When you connect multiple projectors in your system,

you have to set the group index and device index

numbers for each projector.

To set the group index number

If you set the same group index number for multiple

projectors, you can operate multiple projectors and

switchers simultaneously (such as input selection) by

designating the number.

The group index number can be set in the menu.

For group index number setting, see page 30.

To set the device index number

If you set the device index number, you can control

each projector individually with the supplied Remote

Commander.

The device index number can be set with the DEVICE

INDEX switches on the rear of the projector. It is set to

“01” at the factory.

If only one projector is connected, set it to “01.”

Notes

• Do not set the same device index number for the

projectors in the same system.

• Do not set the number to “00.” If you do, the

projector will be operated only with the keys on the

control panel. It cannot be controlled with the wired

or wireless Remote Commander, or with an external

equipment to which the PJ COM connectors are

connected.

Set the same group

index number.

Set the different

group index number

for two systems.

Set the same group

index number.

Set this switcher to 1.

PC-3000

Projector

PC-3000

Projector

Signal flow

PJ COM

Signal flow

PJ COM

PC-3000

Projector

Notes on setting of the index number

• Set the same group index number for all

equipment of the same system connection (those

on the signal route between the signal source and

the projector).

For setting the group index number, see “GROUP INDEX”

on page 30.

• Set the correct group and device index numbers

and the switcher number.

Do not set the same device index number or the same

switcher number in one group.

For example, if there are different pieces of

equipment with the switcher number 1, the error

message will appear when the SYS SET key is

pressed.

• Set the switcher that outputs the signal to the

projector to number 1.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 47 48

Comments to this Manuals

No comments

Sony VPL-FE110U User Manual Page 35

Comments to this Manuals

Related products and manuals for Projectors Sony VPL-FE110U