Sony KDP 51WS655 User Manual download pdf (Page 46)

SETUP Setup SETUPSETUP SETUPSETUP

Adjusting the Convergence Manually

The Convergence feature gives you more control over the picture’s

convergence than the Flash Focus feature, allowing you to fine-tune

the convergence.

1 Press MENU to display the Menu.

2 Press V or v to highlight the Setup icon and press .

3 Press V or v to highlight Convergence and press .

A pattern of white crosses appears, with a yellow around one

of the crosses. Aligned crosses (which do not need adjustment)

look white and have little or no red or blue showing. Crosses that

are not aligned show red or blue shades beyond their edges.

You can scroll up and down through the 9 x 7 field of crosses to

manually converge all portions of the screen.

4 Move the to surround a cross that you want to adjust. Press

. The changes to red.

5 If the cross that you selected has red edges, move until the red

image is replaced with a white cross. Once you have finished this

(or the cross does not have red edges), press . The changes

to blue.

6 If the cross you selected has blue edges, move until the blue

image is replaced with a white cross. Once you have finished this,

press . The changes to yellow again.

7 Repeat steps 4 to 6 to adjust other crosses. When finished, press

MENU to exit the Setup Menu.

✍ Before adjusting the convergence manually for the first time, you must first

perform Flash Focus (as described on page 44). Allow the TV to warm up for

about 30 minutes before you adjust the convergence.

For details on using the

Setup Menu, see page 94.

Move:

Full/Normal

Select:

End: Menu

AX1X_Digital.book Page 45 Wednesday, March 2, 2005 1:13 PM

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 112 113

No comments

Sony KDP 51WS655 User Manual Page 46