Sony CPD-G200 User Manual download pdf (Page 16)

Self-diagnosis function

This monitor is equipped with a self-diagnosis function. If there is

a problem with your monitor or computer, the screen will go

blank and the (!) (power) indicator will either light up green or

flash orange. If the (!) (power) indicator is lit in orange, the

computer is in power saving mode. Try pressing any key on the

keyboard.

Specifications

(!) (power) indicator

If the (!) (power) indicator is green

1 Disconnect the video input cable or turn off the

connected computer.

2 Press the (!) (power) button twice to turn the monitor

off and then on.

3 Move the control button ^ for 2 seconds before the

monitor enters power saving mode.

CRT

Viewable image size

Resolution

Maximum

Recommended

Standard image area

Deflection frequency*

AC input voltage/current

Power consumption

Dimensions

Mass

Plug and Play

Supplied accessories

0.24 mm aperture grille pitch (center)

17 inches measured diagonally

90-degree deflection

FD Trinitron

Approx. 327 X 243 mm (w/h)

(12^/8 X 9 Vs inches)

16.0" viewing image

Horizontal: 1600 dots

Vertical: 1200 lines

Horizontal: 1024 dots

Vertical: 768 lines

Approx. 312 X 234 mm (w/h)

(12 '^/8 X 9 */4 inches)

Horizontal: 30 to 96 kHz

Vertical: 48 to 120 Hz

100 to 240 V, 50/60 Hz, Max. 1.7 A

130 W

Approx. 404 X 413.5 x 419.5 mm (w/h/

d) (16 X 16 ^/8 X 16 ^/8 inches)

Approx. 20 kg (44 lb 1 oz)

DDCl/DDC2B/DDC2Bi/GTF

See page 6

* Recommended horizontal and vertical timing condition

• Horizontal sync width should be more than 1.0 psec.

• Horizontal blanking width should be more than 3.0 psec.

• Vertical blanking width should be more than 500 psec.

Design and specifications are subject to change without notice.

If all four color bars appear (white, red, green, blue), the monitor

is working properly. Reconnect the video input cable and check

the condition of your computer.

If the color bars do not appear, there is a potential monitor failure.

Inform your authorized Sony dealer of the monitor’s condition.

If the (!) (power) indicator is flashing orange

Press the (!) (power) button twice to turn the monitor off

and then on.

If the (!) (power) indicator lights up green, the monitor is working

properly.

If the (!) (power) indicator is still flashing, there is a potential

monitor failure. Count the number of seconds between orange

flashes of the (!) (power) indicator and inform your authorized

Sony dealer of the monitor’s condition. Be sure to notejhe model

name and serial number of your monitor. Also note the make and

model of your computer and video board.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 60 61

Comments to this Manuals

No comments

Sony CPD-G200 User Manual Page 16

Comments to this Manuals

Related products and manuals for Monitors Sony CPD-G200