Sony KDL-40R471A Operations Instructions download pdf (Page 20)

20

GB

Start-up Logo

Select [On] to display the logo when the

TV is turned on. Select [Off] to disable it.

LED Indicator

Select [On] to light up the LED indicator.

Select [Off] to disable it.

AV Set-up

AV Preset: Assigns name to external

equipment input.

Enable: Select [Auto] to display names

only when the equipment is connected,

or [Always] to display regardless of

connection status.

AV2/Component Input: Select [Auto] to

have the TV detect and switch

between the component video jack

or the video jack when component

video jack or video jack is connected.

Note

• You cannot use the component video jack

and the video jack at the same time.

Speakers: Select sound output from

the TV speakers or external audio

equipment.

Headphone/Audio Out: Sets the sound

output to headphones, external

audio systems or Active Subwoofer

connected to the TV. Disconnect

headphones from the TV when you

select [Audio Out] or [Subwoofer].

Headphone Speaker Link: Switches the

TV’s internal speakers on/off when

you connect headphones to the TV.

Headphone Volume: Adjusts the

volume of the headphones.

Note

• This option is not available, when

[Headphone/Audio Out] is set to [Audio

Out].

Audio Out:

Variable: When using an external

audio system, volume output from

audio out can be controlled using the

TV’s remote control.

Fixed: The audio output of the TV is

fixed. Use your audio receiver’s

volume control to adjust the volume

(and other audio settings) through

your audio system.

Digital Audio Out: Sets the audio signal

that is output by connecting using

digital audio output (optical) cable or

HDMI (ARC) cable. Set to [Auto],

when connecting equipment

compatible with Dolby Digital or DTS.

Set to [PCM], when connecting

equipment not compatible with

Dolby Digital or DTS.

TV Position: Improves the speaker

settings when set as [Table-Top

Stand] or [Wall Mount] according to

your TV’s position.

BRAVIA Sync Settings

Allows the TV to communicate with

equipment that is compatible with the

BRAVIA Sync Control function, and

connected to the HDMI/MHL jacks of the

TV. Note that communication settings

must also be made on the connected

equipment.

BRAVIA Sync Control: Sets whether or

not to link the operations of the TV

and the connected equipment that is

compatible with BRAVIA Sync

Control. When set to [On], the

following functions are available. If

the specific Sony equipment that is

compatible with BRAVIA Sync Control

is connected, this setting is applied

to the connected equipment

automatically.

Auto Devices Off: When this is set to

[On], the connected equipment that

is compatible with BRAVIA Sync

Control turns off when your TV goes

to stanby mode.

Auto TV On: When this is set to [On],

the TV turns on when you turn on the

connected equipment that is

compatible with BRAVIA Sync Control

(except in MHL mode).

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Comments to this Manuals

No comments