Sony KDL-40R471A Operations Instructions download pdf (Page 16)

16

GB

Balance

Emphasises left or right speaker balance.

Volume Offset

Adjusts the volume level of the current

input relative to other inputs.

Dual Sound

Sets the sound from the speaker to

[Mono], [Stereo], [A] or [B].

Note

• If the signal is very weak, the sound becomes

monaural automatically.

• If the stereo sound is noisy when receiving a

NICAM programme, select [Mono]. The sound

becomes monaural, but the noise is reduced.

• The [Dual Sound] setting is memorized for

each programme position.

• You cannot listen to stereo broadcast sound

when [Mono] is selected.

Hint

• If you select other equipment connected to the

TV, set [Dual Sound] to [Stereo], [A] or [B].

Advanced Settings

Dynamic Range: Compensates for

differences in the audio level

between different channels (only for

Dolby Digital audio).

Note

• The effect may not function or may vary

depending on the programme regardless of

the [Dynamic Range] setting.

Downmix Mode: Set the downmix

method that are suitable for multi-

channel and 2-channel sound.

Screen

Screen Format

For details about wide mode, see page 10.

Auto Format

Automatically changes [Screen Format] to

match the input signal.

To keep your setting, set [Off].

Hint

• Even if [Auto Format] is set to [On] or [Off], you

can always modify the format of the screen by

pressing repeatedly.

4:3 Default

Sets the default [Screen Format] for a 4:3

input signal.

Auto Display Area

Automatically adjusts the picture to the

most appropriate display area.

Display Area

Adjusts the picture display area.

Horizontal Shift

Adjust the horizontal position of the

picture.

Vertical Shift

Adjust the vertical position of the picture.

Vertical Size

Adjusts the vertical size of the picture

when [Screen Format] is set to [Wide

Zoom].

PC Adjustment

Selects screen mode or adjust the display

position of the picture when receiving PC

input signal.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Comments to this Manuals

No comments