Using WEGA GATE
33
GB
Changes the order in which the channels are stored on the TV.
1 Press to select “Program Sorting”.
2 Press M/m to select the channel you want to move to a new position,
then press .
3 Press M/m to select the new position for the channel, then press .
Repeat the procedure in steps 2 and 3 to move other channels if required.
Assigns a channel name of your choice up to five letters or numbers. The name will be
displayed briefly on the screen when the channel is selected.
1 Press to select “Program Label”.
2 Press M/m to select the channel you want to name, then press .
3 Press M/m/</, to select the desired letter or number (“s” for a blank
space), then press .
If you input a wrong character
Press M/m/</, to select %/5 and press repeatedly until the wrong character is
selected. Then, press M/m/</, to select the correct character and press .
4 Repeat the procedure in step 3 until the name is complete.
5 Press M/m/</, to select “End”, then press .
Do the following options.
1 Press to select “AV Preset”.
2 Press M/m to select the desired input source, then press .
3 Press </, to select the desired option below, then press .
Program Sorting
Program Label
AV Preset
Option Description
Label Assigns a name to any equipment connected to the side or rear
jacks. The name will be displayed briefly on the screen when the
equipment is selected.
Press M/m to select one of the following, then press .
Video1/Video2/Video3/HD/DVD1/HD/DVD2/PC: Uses one of
these preset labels.
Edit: Creates your own label. Follow steps 3 to 5 of “Program
Label” (page 33).
Skip: Skips an input source that is not connected to any equipment
when you press / to select the input source.
After selecting this option, press .
Note
You cannot change the PC label.
Continued
Comments to this Manuals