Sony KDL-40X2000 Operations Instructions download pdf (Page 49)

Additional Information

Sound

Problem Cause/Remedy

No sound, but good picture

• Press 2 +/– or % (Mute).

• Check that “Speaker” is set to “On” in the “Set-up” menu (page 32).

Noisy sound

• See “Picture noise” causes/remedies on page 48.

Channels

Problem Cause/Remedy

The desired channel cannot be

selected

• Switch between digital and analogue mode and select the desired digital/

analogue channel.

Some channels are blank

• Scrambled/Subscription only channel. Subscribe to the Pay Per View

service.

• Channel is used only for data (no picture or sound).

• Contact the broadcaster for transmission details.

Digital channels are not

displayed

• Contact a local installer to find out if digital transmissions are provided in

your area.

• Upgrade to a higher gain aerial.

General

Problem Cause/Remedy

The TV turns off automatically

(the TV enters standby mode)

• Check if the “Sleep Timer” is activated, or confirm the “Duration” setting of

“On Timer” (page 31).

• If no signal is received and no operation is performed in the TV mode for

10 minutes, the TV automatically switches to standby mode.

The TV turns on automatically

• Check if the “On Timer” is activated (page 31).

Some input sources cannot be

selected

• Select “AV Preset” in the “AV Set-up” menu and cancel “Skip” of the input

source (page 33).

The remote does not function

• Check that the remote is set correctly for the equipment you are using.

• Check whether the equipment you want to use corresponds to the function

button being pressed (page 14).

• If the remote does not operate the equipment even when the remote has been

set correctly to the equipment, enter the necessary code as explained in

“Programming the remote” (page 44).

• Replace the batteries.

1 2 ... 44 45 46 47 48 49 50 51 52

Comments to this Manuals

No comments

Sony KDL-40X2000 Operations Instructions Page 49

Comments to this Manuals

Related products and manuals for LCD TVs Sony KDL-40X2000