Sony DAV-HDX287WC User Manual download pdf (Page 65)

Control for HDMI/External Audio Device

65

US

When sound transmission is established,

“PAIRING” and “COMPLETE” appear

alternately in the front panel display.

x For the S-AIR receiver

Refer to the operating instructions of the

S-AIR receiver.

When sound transmission is established,

“PAIRING” and “COMPLETE” appear

alternately in the front panel display.

Note

• Perform pairing within several minutes of Step

5. If you do not, “PAIRING” and

“INCOMPLETE” appear alternately in the front

panel display. To continue pairing, press and

start again from Step 5. To cancel pairing, press

SYSTEM MENU.

7 Press SYSTEM MENU.

The system menu turns off.

To cancel pairing

Perform the ID setting of the unit according to

the procedure of “To set the ID of the unit.” If

you select a new ID, pairing is canceled.

If you use multiple wireless systems which share

the 2.4 GHz band, such as wireless LAN or

Bluetooth, the transmission of S-AIR products

or other wireless systems may be unstable. In

this case, the transmission may be improved by

changing the following “RF CHANGE” setting.

1 Press SYSTEM MENU.

2 Press X/x repeatedly until “RF

CHANGE” appears in the front panel

display, then press or c.

3 Press X/x to select the desired setting.

•“AUTO”: Normally select this. The

system changes “RF CHANGE” to “ON”

or “OFF” automatically.

• “ON”: The system transmits sound by

searching for the better channel for

transmitting.

• “OFF”: The system transmits sound by

fixing the channel for transmitting.

4 Press .

The setting is made.

5 Press SYSTEM MENU.

The system menu turns off.

6 When you set “RF CHANGE” to “OFF,”

select the ID so that sound

transmission is most stable (page 62).

Note

• In most cases, you will not need to change this

setting.

– If “RF CHANGE” is set to “OFF,” transmission

between the unit and S-AIR sub unit can be

performed using one of the following channels.

– S-AIR ID A: equivalent channel for IEEE

802.11b/g channel 1

– S-AIR ID B: equivalent channel for IEEE

802.11b/g channel 6

– S-AIR ID C: equivalent channel for IEEE

802.11b/g channel 11

• The transmission may be improved by changing the

transmission channel (frequency) of the other

wireless system(s). For details, refer to the operating

instructions of the other wireless system(s).

(Only when using the EZW-RT10A

wireless transceiver.)

1 Press SYSTEM MENU.

2 Press X/x repeatedly until “RF

POWER” appears in the front panel

display, then press or c.

3 Press X/x to select the desired setting.

• “HIGH”: Normally select this.

• “LOW”: The RF output power is

decreased.

4 Press .

The setting is made.

5 Press SYSTEM MENU.

The system menu turns off.

If sound transmission is

unstable

For the surround amplifier

For the S-AIR receiver

Changing the RF output power

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 99 100

Comments to this Manuals

No comments