Sony DAV-HDX287WC User Manual download pdf (Page 51)

Disc

51

US

[OFF]: The system does not output sound from

the HDMI OUT jack.

[ON]: The system outputs audio signals by

converting Dolby Digital, DTS, or 96 kHz/24-

bit PCM signals to 48 kHz/16-bit PCM.

Note

• When you connect the unit and TV with an HDMI

cable and [ON] is selected, [AUDIO DRC], [A/V

SYNC], DYNAMIC BASS, “DEC. MODE,” and

sound mode are not applied to the sound that is output

from the TV.

• When you set the function to other than “DVD,” the

system does not output the sound from the HDMI

OUT jack even if you set [AUDIO (HDMI)] to [ON].

x [JPEG RESOLUTION]

You can select the resolution of JPEG image

files output from the HDMI OUT jack.

[SD

]: The system outputs standard

resolution with a black frame.

[HD ]: The system outputs HD resolution

with a black frame.

[HD]: The system outputs the HD resolution

without a black frame.

[(1920 × 1080i) HD ]: The system outputs

full size HD resolution with a black frame.

[(1920 × 1080i) HD]: The system outputs full

size HD resolution without a black frame.

Note

• [JPEG RESOLUTION] is effective only when you

set [TV TYPE] in [VIDEO SETUP] to [16:9], and

you set [HDMI RESOLUTION] in [HDMI SETUP]

to other than [720 × 480p] or [720 × 480/576p].

• You can select [(1920 × 1080i) HD ] or [(1920 ×

1080i) HD] only when you set [HDMI

RESOLUTION] in [HDMI SETUP] to [1920 ×

1080i].

• The HDMI signal will stop momentarily when:

– the system is loading or unloading a DATA CD or

DATA DVD.

– you change the disc from a DATA CD or DATA

DVD.

– you play a DATA CD or DATA DVD to the end

and the system stops playback automatically.

x [SPEAKER FORMATION]

You can select the position of the speakers for

better surround sound. For details, see “Getting

Optimal Surround Sound for a Room”

(page 66).

x [AUTO CALIBRATION]

You can calibrate the appropriate settings

automatically. For details, see “Calibrating the

Appropriate Settings Automatically” (page 67).

x [AUDIO DRC] (DVD VIDEO only)

You can compress the dynamic range of the

sound track. [AUDIO DRC] is useful for

watching movies at low volume late at night.

[OFF]: No compression of dynamic range.

[STANDARD]: The system reproduces the

sound track with the kind of dynamic range that

the recording engineer intended.

[MAX]: The system compresses dynamic range

fully.

Note

• [AUDIO DRC] works only for Dolby Digital.

x [TRACK SELECTION] (DVD VIDEO only)

You can give the sound track which contains the

highest number of channels priority when you

play a DVD VIDEO on which multiple audio

formats (PCM, DTS, Dolby Digital, or MPEG

audio) are recorded.

[OFF]: Off.

[AUTO]: The system selects the sound track

automatically according to the priority.

Settings for the audio

[AUDIO SETUP]

AUDIO SETUP

AUTO CALIBRATION:

SPEAKER FORMATION:

AUDIO DRC:

OFF

OFF

TRACK SELECTION:

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 99 100

Comments to this Manuals

No comments