Sony BDV-N7100W User Manual download pdf (Page 68)

68

GB

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-337-72(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456337721_GB (E3)\100ADD.fm

masterpage: Left

The sound outputs from the center

speaker only.

t Depending on the disc, the sound may

output from the center speaker only.

No sound or only a very low-level

sound is heard from the surround

speakers.

t Check the speaker connections and

settings (pages 19, 48).

t Check the sound mode setting

(page 30).

t Depending on the source, the effect of

the surround speakers may be less

noticeable.

t Set [Sound Mode] to [Auto] (page 30).

Distortion occurs in the sound of a

connected equipment.

t Reduce the input level for the

connected equipment by setting

[Attenuate - AUDIO] (page 57).

A sudden loud music is heard.

t The build-in sound demonstration is

activated. Press

2 – to reduce the

volume or press x to stop the

demonstration.

Wireless transmission is not

activated or there is no sound from

the surround speakers.

t Check the status of the LINK/

STANDBY indicator on the surround

amplifier.

• Turns off.

– Check that the AC power cord

(mains lead) of the surround

amplifier is connected securely.

– Turn the surround amplifier on by

pressing "/1 on the surround

amplifier.

• Flashes green quickly.

– 1 Press "/1 on the surround

amplifier.

2 Insert the wireless transceiver

into the surround amplifier

correctly.

3 Press "/1 on the surround

amplifier.

•Flashes red.

– Press "/1 to turn off the surround

amplifier, and check the following

items.

1 Are the + and – speaker cords

short-circuited?

2 Is anything blocking the

ventilation holes of the

surround amplifier?

After checking the above items and

fixing any problems, turn on the

surround amplifier. If the cause of

the problem cannot be found even

after checking all the above items,

consult your nearest Sony dealer.

• Flashes green or orange slowly or

turns red.

– Make sure that the wireless

transceiver is inserted correctly

into the main unit.

– Make the [Secure Link] setting

again (page 52).

– Sound transmission is poor. Move

the surround amplifier so that the

LINK/STANDBY indicator turns

green or orange.

– Move the system away from other

wireless devices.

– Avoid using any other wireless

devices.

• Turns green or orange.

– Check the speaker connections and

settings.

Wireless sound

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 83 84

Comments to this Manuals

No comments