Sony BDV-N7100W User Manual download pdf (Page 50)

50

GB

BDV-N9100W/BDV-N8100W/BDV-N7100W

4-456-337-72(1)

D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF

01)\4456337721_GB (E3)\080OTH.fm

masterpage: Left

Deactivating the

Buttons on the Main

Unit

(Child Lock)

You can deactivate the buttons on the main

unit (except for "/1) for preventing

misoperation, such as child mischief.

Touch and hold x on the main unit

for more than 5 seconds.

“LOCKED” appears in the top panel

display.

The child lock function is activated and the

buttons on the main unit are locked. (You

can operate the system by using the remote

control.)

To cancel, touch and hold x for more than

5 seconds until “UNLOCK” appears in the

top panel display.

If you operate the buttons on the main unit while

the child lock function is on, “LOCKED” flashes

in the top panel display.

Controlling Your TV

with the Supplied

Remote Control

By adjusting the remote control signal, you

can control your TV with the supplied

remote control.

When you replace the batteries of the remote

control, the code number may reset to the default

(SONY) setting. Set the appropriate code number

again.

While holding down TV "/1, press

number buttons to enter your TV’s

manufacturer’s code (see the table).

Then release TV "/1.

If the setting is unsuccessful, the currently

registered code is not changed. Re-enter the

code number.

If more than one code number is listed, try

entering them one at a time until you find

the code that works with your TV.

Saving Power in

Standby Mode

Check that you have made the following

settings:

– [Control for HDMI] in [HDMI Settings]

is set to [Off] (page 59).

– [Quick Start Mode] is set to [Off]

(page 60).

– [Remote Start] in [Network Settings] is

set to [Off] (page 61).

Note

Note

Preparing the remote

control for controlling

the TV

Manufacturer Code number

SONY 01 (default)

LG 05

PANASONIC 06

PHILIPS 02, 03, 07

SAMSUNG 02, 08

TOSHIBA 04

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 83 84

Comments to this Manuals

No comments