Sony MDS-JE480 User Manual download pdf (Page 9)

Recording to MDs

lename[C:\Documents and Settings\pc13\Desktop\MDS-JE480 PMRF\Revise

odel\J9060101_4238553151MDSJE480CEL\4238553151\GB05OPE-CEL.fm]

model name1[MDS-JE480]

[4-238-553-15(1)]

masterpage:Left

(3 column)

To prevent accidental erasure of the

recorded material

To protect an MD recording, slide the record-

protect tab in the direction of the arrow (see

illustration below) to open the slot. To enable

re-recording, close the slot.

Recording for long times

This deck has two long time recording modes:

LP2 and LP4 (MDLP recording). When

recording in LP2 Stereo mode, you can record 2

times the normal recordable time, and in LP4

Stereo mode, you can record 4 times the normal

recordable time. In addition, the recordable

time for monaural recording is approximately

double the stereo recording time.

LP4 Stereo mode (4× long time recording

mode) achieves a long stereo recording time by

using a special compression system. When

placing emphasis on sound quality, Stereo

recording or LP2 Stereo recording (2× long

time recording mode) is recommended.

1 Do steps 1 to 4 of “Recording to an MD”

on page 8.

2 Press REC MODE repeatedly to select

the recording mode.

3 Do steps 5 to 8 of “Recording to an MD”

on page 8.

Tips

• The MDLP indicator lights up when you select LP2

or LP4 in step 2 above.

• The deck is factory set to add “LP:” at the beginning

of a track name automatically. This indication is

displayed when the track is played on a deck that

does not support long-time recording.

To turn off this function, do the following procedure.

1 While the deck is stopped, playing, or

paused, press MENU/NO.

2 Turn AMS (or press ./> repeatedly)

until “Setup?” appears, then press PUSH

ENTER or YES.

3 Turn AMS (or press ./> repeatedly)

until “LPstamp On” (factory setting)

appears, then press PUSH ENTER or

YES.

4 Turn AMS (or press ./> repeatedly)

to select “LPstamp Off”, and then press

PUSH ENTER or YES.

5 Press MENU/NO.

To add “LP:” automatically again, select “LPstamp

On” in step 4 above.

Notes

• The recorded “LP:” is a stamp which appears to

indicate that the track cannot be played back when

you try to play the track on a system that does not

support MDLP mode. It does not appear for systems

that support MDLP mode.

• When set to “On”, “LP:” is recorded as the track

name, so the number of characters that can be input

to an MD is reduced. If you divide an “LP:” track

using the Divide function, “LP:” is also added to the

latter track.

• The selected recording mode is kept even after

recording is completed, so be sure to check the

recording mode before recording.

• Tracks recorded in MDLP (LP2 or LP4) Stereo

mode cannot be played back on a system that does

not support MDLP mode.

• Even if you press REC MODE during recording,

you cannot change the recording mode.

• Even if you press REC MODE repeatedly to select

MONO, the monitor signal during recording does

not become monaural.

• You cannot use S.F Edit and some MD edit

functions for tracks recorded in MDLP mode.

Recording tips

— Recording for long times/Marking

track numbers/Smart Space/Adjusting

the recording level/Checking the

remaining recordable time/Input

monitor

To record in Set REC MODE to

Stereo Blank (No indicator)

LP2 Stereo LP2

LP4 Stereo LP4

Monaural MONO

Record-protect tab

Slide in the direction

of arrow

continued

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Comments to this Manuals

No comments

Sony MDS-JE480 User Manual Page 9

Comments to this Manuals

Related products and manuals for Home audio sets Sony MDS-JE480