Sony LBT-XGR99AV User Manual download pdf (Page 33)

Troubleshooting

The tape does not record.

• No cassette is loaded. Load a cassette.

• The tab has been removed from the cassette.

Cover the broken tab with adhesive tape

(page 35).

• The tape has wound to the end.

If the system still does not

operate properly after performing

the above measures, reset the

system as follows:

1 Press x on deck B, TUNER ENTER and

?/1 at the same time.

2 Unplug the power cord.

3 Plug the power cord back in.

4 Press ?/1 to turn on the system.

The system is reset to the factory settings. You

should set the settings you made, such as the

preset stations, clock, and timer.

One of the following messages may appear or

flash in the display during operation.

CANNOT EDIT

The selected disc contains more than 20 tracks or

Program Play mode has been set.

NO STEP

You have cleared all the tracks you programed.

OVER

You have reached the end of the disc while pressing

M during playback or pause.

PUSH STOP

You have pressed PLAY MODE during playback.

STEP FULL

You tried to program 26 or more tracks (steps).

TAPE

NO TAB

You cannot record the tape because the tab has been

removed from the cassette.

NO TAPE

There is no tape in the tape deck.

Timer

OFF TIME NG

The Daily Timer or Timer Recording start and end

times are set to the same time.

Messages

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 39 40

Comments to this Manuals

No comments

Sony LBT-XGR99AV User Manual Page 33

Comments to this Manuals

Related products and manuals for Home audio sets Sony LBT-XGR99AV