Sony DHC-MD717 User Manual download pdf (Page 20)

20

Playing an MD (continued) Tips

•You can switch from another source to the MD

deck and start playing a MD just by pressing ·∏

(or MD · on the remote) or the MD 1 – 3 buttons

if an MD is loaded in the slot (Automatic Source

Selection).

•You can also select and start playing a track in

step 5.

1 Press DISC SKIP (or MD D.SKIP on the remote)

and select the desired MD.

2 Turn SELECTOR (or press MD = or + on

the remote) until the desired track number

appears.

3 Press ·∏ (or MD · on the remote).

•The MD 1 – 3 button indicators have the following

meanings when lit.

Green: The slot is selected or the MD loaded in

the slot is playing.

Orange: An MD is loaded in the slot.

•When an MD is loaded in the slot, the MD 1 – 3

indicator for the slot is lit orange.

•If an MD is not loaded to any of MD 1 – 3, “NO

DISC” appears.

To Do this

Stop play Press p.

Pause Press ·∏ (or MD P on the

remote). Press again to resume

play.

Select a track Turn SELECTOR clockwise (to

go forward) or counter-

clockwise (to go back) and

release it when you locate the

desired track (or press MD +

or = on the remote).

Find a point in Press 0 or ) during play

a track and release it at the desired

point.

Select an MD • Press MD 1 – 3. Play starts

when the button is pressed.

• Press DISC SKIP (or MD

D.SKIP on the remote) so

that the MD 1 – 3 button is lit

green. Press ·∏ (or

MD · on the remote) to

play the selected MD.

If you press DISC SKIP (or MD

D.SKIP on the remote) during

play, the selected MD changes

and the new MD is played.

Remove an MD 1 Press PUSH OPEN and open

the door of the MD deck.

2 Press § and remove the MD

from the slot.

Adjust the Turn VOLUME (or press VOL

volume

or on the remote).

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 103 104

Comments to this Manuals

No comments