Sony SU-WL700 User Manual download pdf (Page 6)

− 6 −

Additional Information for Using Sony Wall-Mount Bracket (SU-WL700)

10 Adjust the angle of the Mounting Bracket.

Use the supplied hexagon wrench.

When installing the Display parallel to the wall (0 degrees), adjustment of the Mounting Bracket angle

(procedures



and



below) is not necessary.

 Remove the two angle adjusting screws from the Mounting Bracket.

 Secure the screws to the corresponding holes for the desired angle (“,” “5,” “10,” “15” or

“20”).





Hexagon

wrench

✍

• Be sure that both the le and right sides are set to the same angle, and secure the screws to the

corresponding angle holes (two screws for each side, le and right).

• Make sure that the two arms of the Mounting Bracket are screwed in securely.

CAUTION

Be careful not to pinch your ngers when adjusting the angle of the Mounting Bracket.

11 Install the TV on the wall.

Refer to the Instructions for SU-WL700.

Make sure that you carry out this task with at least two or three people.

Do not attempt to li the TV by yourself.

For holding and carrying the TV, refer to your TV’s instructions.

✍

• When you put the TV back on the stand, reverse the above steps.

• Remove the screws or install the Mounting Bracket on a stable and level surface.

• Available TV models vary depending on the country/region.

• e availability of this Wall-Mount Bracket (SU-WL700) varies depending on the country/region.

1 2 3 4 5 6

No comments

Sony SU-WL700 User Manual Page 6