Sony RDR-HX910 User Manual download pdf (Page 88)

Audio Connection

The following setup items switch the method of

outputting audio signals when you connect a

component such as an amplifier (receiver) with a

digital input jack.

For connection details, see “Step 4: Connecting

the Audio Cords” on page 16.

Select “Dolby Digital,” “MPEG,” “DTS,” and

“48kHz/96kHz PCM” after setting “Digital Out”

to “On.”

If you connect a component that does not accept

the selected audio signal, a loud noise (or no

sound) will come out from the speakers, and may

affect your ears or cause speaker damage.

1 Select “Audio Connection” in “Audio,” and

press ENTER.

2 Select “Digital Out,” and press ENTER.

3 Select “On,” and press ENTER.

4 Set the digital output signal.

• Dolby Digital (HDD/DVDs only)

Selects the type of Dolby Digital signal.

• MPEG (DVD VIDEO only)

Selects the type of MPEG audio signal.

• DTS (DVD VIDEO only)

Selects whether or not to output DTS signals.

• 48kHz/96kHz PCM (DVD VIDEO only)

Selects the sampling frequency of the audio

signal.

b Notes

• “48kHz/96kHz PCM” setting has no effect when audio

signals are output from the LINE 2 OUT (R-AUDIO-

L) jacks. If the sampling frequency is 96kHz, signals

are simply converted to 96kHz analog signals and

output.

• When you use the DIGITAL OUT (COAXIAL or

OPTICAL) jack to listen to MPEG audio signals and

set “MPEG” to “MPEG” in “Audio” setup, no sound

will come from your speakers if you select one of the

TVS modes.

On Normally select this position.

Off The influence of the digital

circuit upon the analogue

circuit is minimal.

D-PCM

Select this when the recorder is

connected to an audio component

lacking a built-in Dolby Digital

decoder. The surround effects of

output signals are determined by

the “Downmix” setting item in

“Audio” setup.

Dolby

Digital

Select this when the recorder is

connected to an audio component

with a built-in Dolby Digital

decoder.

Audio - Audio Connection

Digital Out : On

Dolby Digital :

48kHz/96kHz PCM : 48kHz/16bit

DTS :

MPEG : PCM

Off

D-PCM

PCM Select this when the recorder is

connected to an audio component

without a built-in MPEG decoder.

If you play MPEG audio sound

tracks, the recorder outputs stereo

signals via the DIGITAL OUT

(COAXIAL or OPTICAL) jack.

MPEG Select this when the recorder is

connected to an audio component

with a built-in MPEG decoder.

On Select this when the recorder is

connected to an audio component

with a built-in DTS decoder.

Off

Select this when the recorder is

connected to an audio component

without a built-in DTS decoder.

48kHz/

16bit

The DVD video audio signal is

converted to 48kHz/16bit and

output.

96kHz/

24bit

All signals containing 96kHz/

24bit are output without

conversion. However, the signals

are output at 48kHz/16bit if

contained.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 111 112

Comments to this Manuals

No comments

Sony RDR-HX910 User Manual Page 88

Comments to this Manuals

Related products and manuals for DVD players Sony RDR-HX910