Sony RDR-HX910 User Manual download pdf (Page 79)

DV Dubbing

6 Select “OK,” and press ENTER.

A new Scene List menu appears with the

selected scene.

To add a scene, select “Add.”

A Thumbnail picture

B Time information

C Total duration of the program

D Total number of scenes

7 When you finish adding scenes, select the

scene you want to edit, and press ENTER.

The sub-menu appears.

“Move”: Changes the scene order. Follow the

explanations on the screen to change the order

by pressing M/m and ENTER.

“Erase”: Erases the scene. When asked for

confirmation, select “OK.”

“Preview”: Plays the selected scene.

“Change IN”: Changes the start of the scene.

Repeat from step 4.

“Change OUT”: Changes the end of the scene.

Repeat from step 5.

8 When you finish editing the Scene List,

select “OK,” and press ENTER.

The display for entering the title name

appears. To enter a new name, select “Enter,”

and follow the explanations on page 33.

9 Select “OK,” and press ENTER.

The default title name is fixed, and the display

asks if you want to start recording.

To change the disc media, select “Media” and

press M/m. To change the dubbing mode,

select “Dub Mode” and press M/m.

Select “Start,” and press ENTER.

The recorder starts recording the tape contents

as programmed.

• If the recording does not fit due to the

dubbing mode you selected, the display asks

if you want to continue.

To change the dubbing mode, select “Reset”

and repeat from step 9.

To have the recorder adjust the dubbing

mode, select “Auto Dub Mode.”

• If there is not enough disc space even after

changing the dubbing mode, the display

asks if you want to record halfway.

To continue, select “OK.”

To stop during recording

Open the remote’s cover and press x REC STOP.

Note that it may take a few seconds for the

recorder to stop recording.

b Notes

• Contents recorded to the HDD or a DVD may not be

recorded as programmed if the tape’s time code is not

sequential or there are blanks between the recordings

on the tape. In this case, see “Recording from

connected equipment without a timer” on page 47.

• The start and end points of a programme may be

different from what you have set if the source DV/

Digital8 format tape is in any of the following

conditions:

– Recording mode was changed during the recording.

– There is a blank space in the recorded portion of the

tape.

• If you set the beginning of the tape as the IN point and

the end point as the OUT point, the IN and OUT points

may move slightly during dubbing.

• You cannot set a scene to be shorter than one second.

0:00:30-0:00:52

DV EDIT

SCENE LIST

To ta l

Quit

Add

0:00:22

Scenes

0H00M22S

Title Name

Enter the title name.

11.10.03 13:30 - 12.11.03 16:46

OK Enter

2.6

DVD GB

Change the dubbing mode if necessary.

Cancel

Start

DV Dubbing

Media Dub Mode

Select "Start" to start dubbing.

SP 0.8

Data capacity required for the dubbing

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 111 112

Comments to this Manuals

No comments

Sony RDR-HX910 User Manual Page 79

Comments to this Manuals

Related products and manuals for DVD players Sony RDR-HX910