Sony DAV-DZ110 User Manual download pdf (Page 20)

20

GB

Getting Started – BASIC –

• [VIDEO]: outputs video signals.

• [RGB]: outputs RGB signals.

Note

• If your TV does not accept RGB signals, no

picture appears on the TV screen even if you

select [RGB]. Refer to the instructions supplied

with your TV.

10Press ENTER.

The Setup Display for selecting the speaker

formation appears.

11Press C/c to select the speaker

formation image as the speakers are

actually positioned, then press ENTER.

For details, see “Getting Optimal Surround

Sound for a Room” (page 66).

12Connect the calibration mic to the

A.CAL MIC jack on the front panel and

press X/x to select [YES], then press

ENTER.

Set up the calibration mic at the ear level

using a tripod, etc. (not supplied). The front

of each speaker should face the calibration

mic, and there should be no obstruction

between the speakers and the calibration

mic. Be quiet during the measurement.

Auto Calibration starts.

Note

• Loud test sound is output when [AUTO

CALIBRATION] starts. You cannot turn the

volume down. Give consideration to children

and neighbor.

• Avoid being in the measurement area and

making noise during the measurement (which

takes about 3 minutes), as it may interfere with

measurement.

13 Unplug the calibration mic and press C/

c to select [YES].

Quick Setup is finished. All connections

and setup operations are complete.

SPEAKER FORMATION

STANDARD

A.CAL MIC

Calibration mic

Connect calibration mic. Start

measurement?

YES

AUTO CALIBRATION

NO

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 99 100

Comments to this Manuals

No comments