Sony SRP-X700P User Manual

SRP-X700P 2002 Sony CorporationSRP-X700P ManagerUser Control PanelOperating Instructions (Control Software Manual Ver. 1.1)Before using the software

10Names and Functions of Controls on Screenqd GAIN LIMIT and qf OVER GAIN indicatorsThe sending level from input section is the sum of theqj INPUT fad

111.2.2 INPUT EQ ScreenYou can set the low-cut filter, feedback reducer and parametric equalizer of the SRP-X700P input blockfrom the INPUT EQ screen.

12Parametric Equalizer BlockThe MIC1/WL1, MIC2/WL2, MIC3, MIC4, MIC5/LINE1 andMIC6/LINE2 channels have a 3-band parametric equalizer, and theLINE3 and

131.3 ROUTING ScreenOn this screen, you can set to which output channel the input signal is to be output.1 INPUT indexDisplays the INPUT channel index

14Names and Functions of Controls on Screen1.4 OUTPUT ScreenYou can set the parameters of the output block of the SRP-X700P from the OUTPUT screen.1.4

15qf FADER select and qg OUTPUT faderThe qg OUTPUT fader has the two modes of ACTIVE andINACTIVE.To switch the fader mode, click the qf FADER select.

16Names and Functions of Controls on Screen1.4.2 OUTPUT EQ ScreenYou can set the equalizer of the SRP-X700P output block from the OUTPUT EQ screen.1 C

171.5 REMOTE ScreenYou can establish various setups of the remote terminal from the REMOTE screen.PARALLEL I/O Block1 PARALLEL INPUT indicatorDisplays

18Names and Functions of Controls on ScreenPROJECTOR CONTROL BlockYou can establish various setups to control a projector, refer to“How to Control the

19Parameters in the PARALLEL INPUT FUNCTION setup boxParameter—————A: Selects A.toF: Selects F.OFF: Enters the off state.Mic1: Selects Mic1.toMic4: Se

2Table of ContentsFeatures ...

20USER DEFINE ScreenUse this screen to set the communication protocol when USER DEFINE is selected in the PROJECTORPROTOCOL setup box.When USER DEFINE

21Port setupSets the communication conditions between the SRP-X700P and projectors.4 BITS PER SECOND setup boxSets the baud rate.Select the desired sp

22INPUT SELECT command setupSets the command to select the input terminal of the projector in accordance with the SRP-X700P LINE4 SELECT selection. It

23Connectable projectorsProjectors meeting the following specifications can be connected.• Equipped with RS-232C remote terminal• The RS-232C remote t

24Connection to projectorFor details of the method of connecting to a projector, see “System example when operating the SRP-X700P with the default set

255. Input select operation check using the TEST button1 Do not input any signal to LINE4 INPUT of the SRP-X700P. Select VIDEO using the signal format

26Names and Functions of Controls on Screen1.6 GROUP FADER ScreenYou can group several faders in order to move multiple internal faders from the Remot

271.7 SCENE ScreenYou can set scenes from this screen.You can store the setups on each screen of INPUT, ROUTING, OUTPUT and GROUP FADER into the inter

28The User Control Panel software enables you to operate the SRP-X700P more simply from a personalcomputer that you may use for presentations and othe

29Before contacting a Sony Sales office or Dealer, check the following again. If the trouble persists, contactyour local Sony Sales office or Dealer.T

3FeaturesThe CD-ROM supplied with the SRP-X700P contains twoapplications and the driver software.By installing the software in a personal computer run

4InstallationThe dedicated USB driver software is necessary toconnect the SRP-X700P Manager and User ControlPanel to the SRP-X700P.Installing the Dedi

5Installing the User Control Panel1 Insert the supplied CD-ROM into the CD-ROM drive of thepersonal computer.Open the SRP-X700P Control folder.Double-

6The SRP-X700P Manager enables you to set all parameters of the SRP-X700P.Starting the SRP-X700P ManagerIf the SRP-X700P Manager is started after conn

7Edit menu (Displayed only on the INPUT andOUTPUT screens)Copy: Copies the parameters.You can copy the parameters of the desired channel to the specif

8Names and Functions of Controls on Screen1.1 BLOCK ScreenThe BLOCK screen displays the setup status and the signal level according to the internal bl

91.2 INPUT ScreenYou can set parameters of the input block of the SRP-X700P from the INPUT screen.1.2.1 INPUT OVERVIEW ScreenThis screen corresponds t