55
GB
Other Recording Operations
The synchronized recording pauses when
no sound is detected for more than 2
seconds, and “ ” begins to flash.
The IC recorder starts recording again as a
new file when sound is detected.
P Notes
• During synchronized recording, you cannot
pause recording (page 23), record with the
pre-recording function (page 43), record
with the VOR function (page 45), record
with the cross-memory recording function
(page 50), and add a track mark (page 81).
• Depending on the piece of equipment
connected to the IC recorder, the
synchronized recording function may not
operate properly due to a difference in the
audio input level.
To record without using the
synchronized recording function
1 Select the (Recording) tab t “同步
录音” in the menu, and then press
N/
ENT.
2 Press v or V on the control button to
select “关,” and then press
N/ENT.
“同步录音” is set to “关” when you
purchase the IC recorder.
3 Press x STOP to exit the menu mode.
4 Connect other equipment to the IC
recorder when the IC recorder is in the
stop mode.
Connect the audio output connector
(stereo mini-plug) of other equipment to
the m (microphone) jack of the IC
recorder using a commercially-available
audio connecting cable.
“选择输入模式” appears in the display
window.
If “选择输入模式” is not displayed, set
it in the menu (page 98).
5 Press v or V on the control button to
select “音频输入,” and then press
N/
ENT.
Comments to this Manuals