Sony VPL-CX61 User Manual download pdf (Page 17)

F:\Nouhin_NAGANO_E\0403N_VPL-

CX63_OM_CDROM\0403N_2684389111VPLCX63GB_OM\03C02.fm

masterpage: Right

17

Projecting

Projecting the Picture

VPL-CX63/CX61

2-684-389-11 (1)

Projecting

1 Plug the AC power cord into a wall

outlet, then connect all equipment.

The ON/STANDBY indicator lights in

red and the projector goes into standby

mode.

2 Press the ?/1 key.

The ON/STANDBY indicator flashes in

green.

3 Turn on the equipment connected to

the projector.

4 Press the INPUT key to select the

input source.

Each time you press the key, the input

signal switches as follows:

Smart APA (Auto Pixel Alignment)

adjusts the picture of the connected

equipment so that it is projected clearly.

• If “Auto Input Search” is set to “On,” the

projector searches for the signals from

the connected equipment and displays

the input channel where the input signals

are found.

For details, see “Auto Input Search”

on page 29.

• The Smart APA feature is effective for

the input signal from a computer only.

5 Switch the equipment connected to

output to the projector.

Depending on the type of your

computer, for example a notebook, or an

all-in-one LCD type, you may have to

switch the computer to output to the

projector by pressing certain keys (e.g.,

, etc.), or by changing

your computer’s settings.

APA

FREEZE

KEY

STONE

/TILT

LENS

AUTO

FOCUS

PIC

MUTING

AUDI O

MUTING

INPUT

ENTER

RESET

D ZOOM VOLUME

MENU

VPL-CX63

ON/STANDBY indicator

Rear remote

control detector

To input from Press INPUT

to display

Computer connected to

the INPUT A connector

Input-A

Computer connected to

the INPUT B connector

Input-B

Video equipment

connected to the VIDEO

input connector

Video

Video equipment

connected to the

S VIDEO input

connector

S-Video

Notes

Input-AtInput-BtVideotS-Video

VGA

LCD

//

,

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 57 58

Comments to this Manuals

No comments