Sony RXD-700 User Manual download pdf (Page 7)

Getting Started

PRESET +/–

7 Repeat Steps 2 through 6 to store other stations.

When you tune in AM stations

Adjust the direction of the AM loop aerial for optimum

reception.

If the STEREO indicator remains off

Press ST/MONO when an FM stereo broadcast is

received.

If an FM stereo programme is distorted

The STEREO indicator flashes. Press ST/MONO to

change to monaural (MONO). You will not have the

stereo effect but the distortion will be reduced. To return

to stereo mode, press this button again.

If you cannot tune in the station you want (Manual

Tuning)

With Manual Tuning, you can search through all stations

broadcasting on each band, and tune in stations with

extremely weak signals that you might not be able to

receive with Automatic Tuning.

1 Press TUNER FM/AM repeatedly to choose FM or

AM.

2 Press PRESET +/– repeatedly until you tune in the

desired station.

Press PRESET + for a higher frequency; press

PRESET – for a lower frequency.

If “PRESET” appears in the display

Press TUNE MODE repeatedly until “PRESET”

disappears from the display, then do the above

procedure.

RDS (Radio Data System) Station names are stored

automatically

When you preset an RDS station broadcasting station

name information, the station name is automatically

stored at the station preset.

If you want to label the stations

Follow the procedure described in “Naming the Preset

Stations” on page 13.

Note

If the mains lead is disconnected for about a month, the preset

stations will be cleared from the CD Receiver’s memory, and

you will have to preset the stations again.

Presetting Radio Stations

This section shows you how to store up to 30 of your

favourite FM or AM stations manually onto preset

codes made up of characters (A, B or C) and numbers

(1–0), such as A7. You can store up to 10 stations on

each of the 3 different letters. You can use these letters

to classify stations according to music category or

station band.

1 Press POWER to turn on the CD Receiver.

2 Press TUNER FM/AM repeatedly to choose either

FM or AM.

3 Press and hold PRESET +/– and release it when

the frequency numbers start changing.

Press PRESET + for a higher frequency; press

PRESET – for a lower frequency.

When this unit locates a station, “TUNED”

appears in the display and scanning stops

automatically (Automatic Tuning).

If “PRESET” appears in the display

Press TUNE MODE repeatedly until “PRESET”

disappears from the display, then do the above

procedure.

4 Press MEMORY.

The lowest available preset code number flashes to

indicate that this unit is ready to store the station.

5 Press PRESET +/– repeatedly until the preset code

you want appears in the display.

Each time you press the button, the preset code

changes as follows:

” A1 “” ... “” A0 “” B1 “” ... “

” C0 “” ... “” C1 “” B0 “

If you store a station at a preset code where you

have already stored another station, the previous

station is erased.

6 Press ENTER.

This unit stores the station at the preset code you

specified.

TUNER FM/AM

MEMORY TUNE MODEENTER

1 2 3 4 5 6 7 8 9 10 11 12 ... 91 92

Comments to this Manuals

No comments

Sony RXD-700 User Manual Page 7

Comments to this Manuals

Related products and manuals for CD players Sony RXD-700