Sony RCD-W10 User Manual download pdf (Page 19)

Recording/Editing

19

High-Speed Synchro-Recording

You can easily make digital recordings from a

CD to a CD-R or CD-RW, faster than normal

speed Synchro-Recording.

You cannot monitor the recorded signal while

recording.

When using the remote, set SELECT to CDR.

1 Do Steps 1 to 3 of “Normal speed

Synchro-Recording” on page 18.

2 Press CD SYNCHRO HIGH repeatedly

to select the recording type, “NORM

SYNC” or “MAKE DISC.”

DECK B stands by for recording, and

DECK A stands by for playing. *

* The unit stands by for recording

immediately by pressing YES.

3 After “New Track” appears in the

.display, press H (or X) of DECK B to

start recording.

High-Speed Synchro-Recording starts.

DECK A and DECK B will automatically

stop after recording.

To stop recording

Press x.

Playing from the beginning of

the disc after recording

1 Press x again while the unit is

stopped.

2 Press H.

The unit starts playing from the first track.

Note

When you make Synchro-Recording in programmed

order, the recording speed automatically changes to

Normal.

CD SYNCHRO HIGH

CD SYNCHRO

HIGH

1 Press POWER.

2 Press OPEN/CLOSE of DECK B and

place a recordable CD-R or CD-RW on

the disc tray. Press OPEN/CLOSE of

DECK B again to close the disc tray.

“TOC Reading” appears. The unit starts to

read the TOC (Table of Contents) data and

shows the type of the disc on the deck in the

display.

3 Press OPEN/CLOSE of DECK A (one of

the DISC 1-5 A buttons for RCD-W50C)

and place a CD on the disc tray. Press

OPEN/CLOSE (or A) of DECK A again

to close the disc tray.

When you perform Normal Synchro-

Recording (NORM SYNC), you can choose

the disc which you want to record, and the

play mode.

When you perform Make-Disc Synchro-

Recording (MAKE DISC), the disc in

DECK A is used to record.

4 Press CD SYNCHRO NORMAL

repeatedly to select the recording type,

“NORM SYNC” or “MAKE DISC.”

DECK B stands by for recording, and

DECK A stands by for playing.*

When you place a CD-R or CD-RW in the

deck, the unit optimizes itself for the best

possible recording and “OPC” appears on

the display shortly.

When “Not Blank” appears, make sure that

the blank disc is placed correctly.

* The unit stands by for recording

immediately by pressing YES. While

“OPC” appears, you cannot press YES.

5 After “New Track” appears in the

display, press H (or X) of DECK B to

start recording.

Synchro-Recording starts. DECK A and

DECK B will automatically stop after

recording.

To stop recording

Press x.

With the label side up

H

H

x

SELECT

x

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Comments to this Manuals

No comments