Sony RCD-W10 User Manual download pdf (Page 18)

CD SYNCHRO

NORMAL

Synchro-Recording a CD

to CD-R or CD-RW

You can easily make digital recordings from a

CD to a CD-R or CD-RW. Before recording,

see “Notes on Recording” on page 16. To

record a CD at high speed, see page 19.

There are 2 types of recording. Each recording

type can be selected both in normal speed

Synchro-Recording and High-Speed Synchro-

Recording (page 19).

Normal Synchro-Recording (NORM

SYNC)

• After recording, you must finalize the disc.

Until the disc is properly finalized, it cannot

be played on any other machine. See

“Finalizing a CD-R or CD-RW” on page 24.

• A CD text contained in the disc is not

automatically recorded on the disc. To label

tracks/discs, see “Labeling Tracks/Discs”

(page 26).

Tip

You can perform Synchro-Recording in the

programmed order (page 15).

Make-Disc Synchro-Recording (MAKE

DISC)

Records a CD in the original order of its track

number regardless of the selected play mode,

and finalizes the disc. Be sure to use the disc

that has not been recorded. (“Blank Disc”

appears in the display when you put the disc in

DECK B.)

• A CD text (if contained in the disc) is

automatically recorded. (Note that “Text

Save” in Setup Menu is set to “On.” ) You

can enter the disc name or track name (up to

70 characters each, and 40 tracks per disc).

Tip

When you do not want to record the CD text

automatically, set “Text Save” in Setup Menu to

“Off.” For details, see “Using the Setup Menu” (page

28). Depending on the CDs, the CD text is

automatically recorded even if “Text Save” in Setup

Menu is set to “Off.”

CD SYNCHRO NORMAL

POWER

OPEN/CLOSE

DISC 1-5 A

(OPEN/CLOSE for RCD-W10)

Notes

• You cannot pause recording in Synchro-Recording.

• If Repeat Play has been set, it is automatically

canceled.

• If you start the recording when Shuffle play is set,

Shuffle play is automatically canceled.

• Silent Pause and SBM functions do not work during

Synchro-Recording.

• The recording level is set to 0.0 dB regardless of the

Setup Menu setting.

• When copying a disc digitally recorded under

control of the Serial Copy Management System

(SCMS), the unit automatically select the analog

recording. High speed recording changes to normal

speed recording. For detailed explanation on

SCMS, refer to the “Notes” on page 20.

• When copying a commercial music CD contains

copy protection code, the unit automatically select

the analog recording. High speed recording changes

to normal speed recording.

• You cannot stop recording during finalizing in

Make-Disc Synchro-Recording.

Normal speed Synchro-

Recording

The disc is recorded at the same speed as the

playing CD. You can hear the sound during

recording.

When using the remote, set SELECT to CDR.

SELECT

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Comments to this Manuals

No comments

Sony RCD-W10 User Manual Page 18

Comments to this Manuals

Related products and manuals for CD players Sony RCD-W10