2-659-026-11 (1)LCD Monitor© 2005 Sony CorporationLMD-1420MDInstructions for Use
Installing to the Rack 10VIDEO IN/OUT (BNC)These are the input/output connectors for a composite video signal. Connect them to the composite video inp
Connecting the AC Power Cord / Attaching the Input Adaptor11 Connecting the AC Power CordConnect the supplied AC power cord as illustrated.1Plug the A
Selecting the Default Settings 12Selecting the Default SettingsWhen you turn on the unit for the first time after purchasing it, select the area where
Selecting the Menu Language13 4 If ASIA EXCEPT JAPAN is selected:Customers who will use this unit in the shaded areas shown in the map below should se
Using the Menu 143Press the M or m button to select the USER CONFIG 1/2 (User Configuration 1/2) menu, then press the , or ENTER button.The setting it
Adjustment Using the Menus15 3Press the M or m button to select the item, then press the , or ENTER button.The item to be changed is displayed in yell
Adjustment Using the Menus 16KEY INHIBITKEY INHIBITAdjusting and Changing the SettingsSTATUS menuThe STATUS menu is used to display the current status
Adjustment Using the Menus17 USER CONFIG menuYou can select a language, etc. Items that cannot be adjusted depending on the input signal are displayed
Troubleshooting 18REMOTE PARALLEL menuSelect the PARALLEL REMOTE connector pins for which you want to change the function. You can assign various func
Specifications19 SpecificationsPicture performanceLCD panel a-Si TFT Active MatrixPicture size 14 type 283 × 212 × 354 mm (W/H/Diagonal) (111/4 × 83/8
2Owner’s Record The model and serial numbers are located at the rear. Record these numbers in the spaces provided below. Refer to these numbers whene
Specifications 20Storage and transport conditionsTemperature–20 °C to 60 °C (–4 °F to 140 °F)Humidity 0% to 90%Pressure 700 hPa to 1060 hPaAccessories
Specifications21 Video signal formatsThe unit is applicable to the following signal formats.When an optional input adaptor is installed, the unit is a
Dimensions 22DimensionsFrontRearSideBottomLINE A LINE B SDI SCAN ASPECTRESETMENU VOLUME POWERENTERRGB/COMPONENTEXTSYNCBLUEONLY343 (13 5/8)138.1 (5 1/2
Sony Corporation
3 Important safeguards/notices for use in the medical environments1. All the equipment connected to this unit shall be certified according to Standard
4Table of ContentsPrecaution ... 5On Safety ...
Precaution5 PrecautionOn Safety• Operate the unit only with a power source as specified in the “Specifications” section.• A nameplate indicating opera
Features 6FeaturesThe LMD-1420MD is a 14-type, LCD monitor.Compliance with medical safety standards in America, Canada and EuropeUL60601-1 for America
Location and Function of Parts and Controls7 Location and Function of Parts and ControlsFront Panela Tally lampThe lamp lights in green when this unit
Location and Function of Parts and Controls 8j SDI buttonPress to monitor the signal from the OPTION IN connector.k RGB/COMPONENT buttonPress to monit
Location and Function of Parts and Controls9 Rear Panela OPTION IN connector (D-sub 9-pin, female)When optional SDI input adaptor BKM-320D is connecte
Comments to this Manuals