Sony WX-900BTM User Manual download pdf (Page 26)

26GB

The sound skips during playback of a

BLUETOOTH audio device.

 Reduce the distance between the unit and the

BLUETOOTH audio device.

 If the BLUETOOTH audio device is stored in a case

which interrupts the signal, remove the audio

device from the case during use.

 Several BLUETOOTH devices or other devices

which emit radio waves are in use nearby.

 Turn off the other devices.

 Increase the distance from the other devices.

 The playback sound stops momentarily when the

connection between this unit and the cellular

phone is being made. This is not a malfunction.

The connected BLUETOOTH audio device cannot

be controlled.

 Check that the connected BLUETOOTH audio

device supports AVRCP.

Some functions do not work.

 Check if the connecting device supports the

functions in question.

A call is answered unintentionally.

 The connecting phone is set to answer a call

automatically.

Pairing failed due to a timeout.

 Depending on the connecting device, the time

limit for pairing may be short.

 Try completing the pairing within the time.

BLUETOOTH function cannot operate.

 Turn off the unit by pressing OFF for more than 2

seconds, then turn the unit on again.

No sound is output from the car speakers during

handsfree call.

 If the sound is output from the cellular phone, set

the cellular phone to output the sound from the

car speakers.

Siri Eyes Free is not activated.

 Perform the handsfree registration for an iPhone

that supports Siri Eyes Free.

 Set the Siri function on the iPhone to on.

 Cancel the BLUETOOTH connection with the

iPhone and the unit, and reconnect.

SongPal operation

Application name is mismatched with the actual

application in “SongPal”.

 Launch the application again from the “SongPal”

application.

While running the “SongPal” application via

BLUETOOTH, the display automatically switches

to [BT AUDIO].

 The “SongPal” application or BLUETOOTH

function has failed.

 Run the application again.

The “SongPal” application is automatically

disconnected when the display switches to [IPD].

 The “SongPal” application on iPhone/iPod does

not support iPod playback.

 Change the source of the unit to other than

[IPD], then establish the “SongPal” connection

(page 14).

Error displays/Messages

CD ERROR: The disc cannot be played. The disc will

be ejected automatically.

 Clean or insert the disc correctly, or make sure the

disc is not blank or defective.

CD NO MUSIC: There is no playable file. The disc

will be ejected automatically.

 Insert a disc containing playable files (page 22).

CD PUSH EJT: The disc could not be ejected

properly.

 Press  (eject).

HUB NO SUPRT: USB hubs are not supported.

IPD STOP: iPod playback has finished.

 Operate your iPod/iPhone to start playback.

OVERLOAD: The USB device is overloaded.

 Disconnect the USB device, then press SOURCE to

select another source.

 The USB device has a fault, or an unsupported

device is connected.

READ: Now reading information.

 Wait until reading is complete and playback

starts automatically. This may take some time

depending on the file organization.

USB ERROR: The USB device cannot be played.

 Connect the USB device again.

USB NO DEV: A USB device is not connected or

recognized.

 Make sure the USB device or USB cable is securely

connected.

USB NO MUSIC: There is no playable file.

 Connect a USB device containing playable files

(page 22).

USB NO SUPRT: The USB device is not supported.

 For details on the compatibility of your USB

device, visit the support site on the back cover.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 67 68

Comments to this Manuals

No comments

Sony WX-900BTM User Manual Page 26

Comments to this Manuals

Related products and manuals for Car video systems Sony WX-900BTM