Sony MDX-C6500X User Manual download pdf (Page 25)

Troubleshooting guide

Problem

No sound.

The contents of the memory

have been erased.

Indications do not appear in the

display.

No beep sound.

Cause/Solution

•Cancel the ATT function.

•Set the fader control to the centre position for two-speaker

system.

•Rotate the dial clockwise to adjust the volume.

•The power cord or battery has been disconnected.

•The reset button has been pressed.

t Store again into the memory.

Remove the front panel and clean the connectors. See

“Cleaning the connectors” (page 22) for details.

•The beep sound is cancelled (page 21).

•If you connect an optional amplifier and do not use the built-

in amplifier, the beep sound will be deactivated.

CD/MD playback

Cause/Solution

•Another MD is already loaded.

•The MD is forcibly inserted upside down or in the wrong

way.

Defective MD or dirty CD.

The ambient temperature exceeds 50°C.

Press the reset button.

•The unit is installed at an angle of more than 20°.

•The unit is not installed in a sturdy part of the car.

A dirty or defective disc.

You cannot label CDs unless you connect a CD unit with the

custom file function.

t Press (LIST) for two seconds.

Problem

A disc cannot be loaded.

Playback does not begin.

A disc is automatically ejected.

The operation buttons do not

function.

The sound skips due to

vibration.

The sound skips.

Cannot turn off the “--------”

indication.

The following checklist will help you remedy the problems you may encounter with your unit.

Before going through the checklist below, check the connection and operating procedures.

General

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 79 80

Comments to this Manuals

No comments

Sony MDX-C6500X User Manual Page 25

Comments to this Manuals

Related products and manuals for Car media receivers Sony MDX-C6500X