Sony CDX-R3350EE User Manual download pdf (Page 14)

14

Power requirements: 12 V DC car battery

(negative earth)

Dimensions: Approx. 178 × 50 × 179 mm (w/h/d)

Mounting dimensions: Approx. 182 × 53 × 161 mm

(w/h/d)

Mass: Approx. 1.2 kg

Supplied accessories:

Card remote commander: RM-X151

Parts for installation and connections (1 set)

Optional accessory:

Rotary commander RM-X4S (CDX-R3350EE

only)

Design and specifications are subject to change

without notice.

• Lead-free solder is used for soldering certain parts.

(more than 80 %)

• Halogenated flame retardants are not used in the

certain printed wiring boards.

• Halogenated flame retardants are not used in

cabinets.

• VOC (Volatile Organic Compound)-free vegetable oil

based ink is used for printing the carton.

• Packaging cushions do not use polystyrene foam.

Troubleshooting

The following checklist will help you remedy

problems you may encounter with your unit.

Before going through the checklist below, check

the connection and operating procedures.

General

No power is being supplied to the unit.

• Check the connection. If everything is in order,

check the fuse.

• If the unit is turned off and the display

disappears, it cannot be operated with the

remote commander.

t Turn on the unit.

The power aerial does not extend.

The power aerial does not have a relay box.

No sound.

• The volume is too low.

• The ATT function is activated, or the Telephone

ATT function (when the interface cable of a car

telephone is connected to the ATT lead) is

activated.

• The position of the fader control (FAD) is not

set for a 2-speaker system.

US and foreign patents licensed from Dolby

Laboratories.

MPEG Layer-3 audio coding technology and

patents licensed from Fraunhofer IIS and

Thomson.

No beep sound.

• The beep sound is cancelled (page 9).

• An optional power amplifier is connected and

you are not using the built-in amplifier.

The contents of the memory have been

erased.

• The RESET button has been pressed.

t Store again into the memory.

• The power connecting lead or battery has been

disconnected.

• The power connecting lead is not connected

properly.

Stored stations and correct time are erased.

The fuse has blown.

Makes noise when the position of the

ignition key is switched.

The leads are not matched correctly with the

car’s accessory power connector.

The display disappears from/does not

appear in the display window.

• The dimmer is set “DIM-ON” (page 9).

• The display disappears if you press and hold

(OFF).

t Press and hold (OFF) again until the

display appears.

• The connectors are dirty (page 13).

CD playback

The disc is automatically ejected.

The disc has trouble.

t Check the following:

The disc cannot be loaded.

• Another disc is already loaded.

• The disc has been forcibly inserted upside

down or in the wrong way.

The disc does not playback.

• Defective or dirty disc.

• The CD-Rs/CD-RWs are not for audio use

(page 11).

MP3 files cannot be played back.

The disc is not corresponding to the MP3 format

and version (page 11).

MP3 files take longer to play back than

others.

The following discs take a longer time to start

playback.

– a disc recorded with a complicated tree

structure.

– a disc recorded in Multi Session.

– a disc to which data can be added.

The ATRAC CD cannot play.

• The disc is not created by authorized software,

such as SonicStage or SonicStage Simple

Burner.

• Tracks that are not included in the group cannot

be played.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

Comments to this Manuals

No comments