Sony HVR-MRC1 User Manual download pdf (Page 21)

AC adaptor/charger

Do not short-circuit the DC plug of the AC adaptor/charger

or battery terminal with any metallic objects. This may cause

a malfunction.

To install the battery pack to this unit

Slide the battery pack in the direction of the b mark on

the battery pack.

To remove the battery pack from this unit

Press the BATT RELEASE button of this unit and slide the

battery pack in the direction of the arrow.

To connect this unit to a wall outlet

For prolonged operation, such as playing the recorded

images, you can operate this unit from a domestic wall outlet

without worrying about battery life.

1 Set the mode change switch of the AC adaptor/

charger to VCR/CAMERA.

Notes

When the mode change switch is set to CHARGE, there is

no power supply.

2 Connect the DK cable to the DC IN jack on this unit.

3 Connect the DK cable to the AC adaptor/charger.

4 With the power cord, connect the AC adaptor/charger

to a wall outlet.

Notes

You can leave the battery pack installed while operating from

AC power. The power supply to the DC IN jack has priority.

To use the AC adaptor/charger from a vehicle

power supply

For details, refer to the operating instructions supplied with

the AC adaptor/charger.

Notes on battery pack/AC adaptor

• Avoid the following while the ACCESS lamp is lit. Failure

to do so may cause malfunction.

– Removing the battery pack

– Removing the AC adaptor (while charging with the AC

adaptor)

• Always turn off the POWER switch before removing the

battery pack or the AC adaptor.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 30 31

No comments

Sony HVR-MRC1 User Manual Page 21