Sony HT-SF200 User Manual download pdf (Page 28)

Notes on HDMI

Connections

• Use an HDMI-authorized cable.

• We recommend using a Sony High

Speed HDMI Cable with Ethernet with

the Cable Type Logo.

• We do not recommend using an

HDMI-DVI conversion cable.

• Audio signals (sampling frequency, bit

length, etc.) transmitted from an HDMI

jack may be suppressed by the

connected device.

Saving Power

Consumption

To use the system while saving power

consumption, change the following

settings.

When you set the auto standby function

to on, the system enters standby mode

automatically when you do not operate

the system for about 20 minutes and

the system is not receiving an input

signal.

Press and hold CINEMA for 5 seconds

to set the function to on or off.

To save power consumption during the

standby mode, set the BLUETOOTH

standby mode (page 25) and Control for

HDMI function (page 26) to off.

The default settings for them are on.

Turn the System Off by

Detecting the Using State

Auto standby on

The USB indicator flashes twice.

Auto standby off

The USB indicator flashes once.

Saving Power in Standby

Mode

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 39 40

No comments

Sony HT-SF200 User Manual Page 28