Sony HT-S500RF User Manual download pdf (Page 31)

31

GB

system from the AC outlets (mains),

then connect them again.

 When the system and TV are

connected with the HDMI cable,

check the following.

– The HDMI jack of the connected TV

is labeled with “ARC.”

– The Control for HDMI function of the

TV is set to on.

– On the system, the Control for HDMI

function is set to on (page 27).

 If your TV is not compatible with

Audio Return Channel, connect the

optical digital cable (not supplied)

(refer to the supplied Startup Guide).

If the TV is not compatible with Audio

Return Channel, TV sound will not be

output from the system even if the

system is connected to the TV’s HDMI

IN jack.

 If the sound of the device that is

connected to the optical input jack of

the TV is not output, try the following.

– Connect the cable box or satellite

box directly to the TV IN (OPTICAL)

jack of the system.

 Press INPUT repeatedly to select the

TV input (page 16).

 Increase the volume on the TV or

cancel muting.

 Depending on the order in which you

connect the TV and the system, the

system may be muted. If this

happens, turn on the TV first, then the

system.

 Set the speakers setting of the TV

(BRAVIA) to Audio System. Refer to

the operating instructions of your TV

regarding how to set the TV.

 Check the sound output of the TV.

Refer to the operating instructions of

the TV for the TV settings.

 The system supports the Dolby

Digital, DTS, and PCM audio formats

(page 38). When you play back

unsupported format, set the digital

audio out setting of the TV (BRAVIA)

to “PCM.” For details, refer to the

operating instructions of your TV.

The sound is output from both the

system and the TV.

 Mute the sound of the system or the

TV.

No sound or only a very low-level

sound is heard from the subwoofer.

 Make sure the AC power cord (mains

lead) of the subwoofer is connected

properly (refer to the supplied Startup

Guide).

 Press SW  + to increase the

subwoofer volume (page 20).

 A subwoofer is for reproducing bass

sound. If the input sources contain

very little bass sound components

(i.e., a TV broadcast), the sound from

the subwoofer may be difficult to

hear.

 When you play content compatible

with copyright protection technology

(HDCP), it is not output from the

subwoofer.

No sound or only a very low-level

sound of the device connected to

the system is heard from the

system.

 Press  + and check the volume

level (page 9).

 Press

 or  + to cancel the muting

function (page 9).

 Make sure the input source is

selected correctly. You should try

other input sources by pressing

INPUT repeatedly (page 16).

 Check that all the cables and cords of

the system and the connected device

are firmly inserted.

 If the connected device supports the

up-sampling feature, you need to

turn it off.

No sound or only very low-level

sound is heard from the surround

speakers.

 Make sure that the cables of the

surround speakers are connected

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 43 44

Comments to this Manuals

No comments