Sony UBP-X700 User Manual download pdf (Page 19)

19

Settings and Adjustments

Settings and Adjustments

Using the Settings Displays

Select [Setup] on the home screen when

you need to change the settings of the player.

The default settings are underlined.

1 Select [Setup] on the home screen

using </M/m/,.

2 Select the setup category icon using M/m,

and press ENTER.

[Software Update]

x [Update via Internet]

Updates the player’s software using available

network. Make sure that the network is

connected to the Internet. See “Step 2:

Network Connection” (page 13).

x [Update via USB Memory]

Updates the player’s software using USB

memory. Create a folder named “UPDATE”

and all the update files must be stored in this

folder. The player can recognise up to 500

files/folders in a single layer including the

update files/folders.

z

• We recommend performing the software

update every 2 months or so.

• If your network condition is poor, visit

http://www.sony-asia.com/support/ to

download the latest software version and

update via USB memory.

You can also get information about update

functions from the website.

[Screen Settings]

x [HDR Output]

[Auto]

: Outputs HDR signal depending on

contents and HDMI-SINK capability.

Conversion function is applied when content

is HDR and HDMI-SINK does not support HDR.

[Off]: Always output SDR.

x [Dolby Vision Output]

[On]: Output 4K/DV signals via 4K/DV-

compatible devices.

[

Off]: Automatically outputs HDR signals

when you connect any 4K/HDR or 4K/DV-

compatible equipment.

b

When [On] is selected, 3D playback is not

available.

x

[Display Type]

[TV]

: Select this when the player is connected

to TV.

[Projector]: Select this when the player is

connected to Projector.

z

[HDR Conversion] will be adjusted according to

the display type you select. Even though same

setting value of [HDR Conversion] is selected,

dynamic range of picture is different.

x

[Output Video Resolution]

Normally select [Auto].

x [24p Output]

Outputs 24p video signals only when you

connect a 24p-compatible TV via an HDMI

connection and the [Output Video

Resolution] is set to [Auto], [1080p] or [4K].

[Ultra HD Blu-ray/BD-ROM]

[Auto]

: Outputs 24 Hz video signals only

when connecting a 24p-compatible TV using

the HDMI OUT jack.

[On]: Turns on the function.

[Off]: Select this when your TV is not

compatible with 24p video signals.

[DVD-ROM]

[Auto]: Outputs 24 Hz video signals only

when connecting a 24p-compatible TV using

the HDMI OUT jack.

[

Off]: Select this when your TV is not

compatible with 24p video signals.

[Data content]

This function is available for playback

contents stored in USB memory or data disc.

[Auto]

: Outputs 24 Hz video signals only

when connecting a 24p-compatible TV using

the HDMI OUT jack.

[Off]: Select this when your TV is not

compatible with 24p video signals.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

Comments to this Manuals

No comments