Sony SDZ-S100 User Manual download pdf (Page 28)

Chapter 2 Installation

When the SDZ-S100 is one of several devices on the SCSI

bus

Turn off all SCSI devices on the SCSI bus, including the SDZ-S100.

Caution

When connecting or disconnecting a SCSI cable to SCSI devices

(including the SDZ-S100), turn off all the SCSI devices. Failing to do so

may result in damage.

Connect the SCSI cable to the next device on the SCSI bus, connect the

terminator to the last device on the bus, then issue the host command to

resume operation.

Notes

• The total length of the SCSI cables between the host computer and the last

device should be less than 12 m (39.4 ft.). (The SDZ-S100 internal cable

length is 25 cm (9.8 in.).)

• If the SDZ-S100 is the last device on the SCSI bus, make sure that you connect

the terminator to the open connector.

When you are done, proceed to “Configuring the S-AIT Tape Drive Unit to the

Host” on page 30.

Host computer

SCSI

connector

SCSI devices

SCSI cable

Terminator

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 63 64

No comments

Sony SDZ-S100 User Manual Page 28