Sony SDZ-S100 User Manual download pdf (Page 43)

Appendix

Hardware Reset

In case of an emergency, you can reset the unit by inserting a pointed object such

as a paper clip into the hardware reset hole.

Caution

Resetting the unit with the hardware reset hole may cause you to lose data.

Under normal circumstances, the hardware reset is only for manufacturing or

repair purposes.

Updating the Firmware

You can update the S-AIT Tape Drive Unit firmware by downloading the new

version of the firmware to your unit through the SCSI bus. To obtain up-to-date

firmware and installation instructions, contact your dealer or visit the Sony Web

site (http://www.sony.net/Products/storagesolution/).

Taking Care of the Unit

Safety

Power

• Only use 100 V - 240 V AC.

• Avoid plugging the unit to the same power outlet as high-current equipment

such as copiers or shredders.

Power Cable Precautions

• Do not crush the cable or place heavy objects on it. If the cable insulation

appears worn or broken, do not use the cable.

• Always unplug the cable by holding the plug. Never pull the cable itself as this

may break it.

• If the unit is not used for a prolonged period, unplug the cable from the power

outlet.

Hardware

reset hole

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 63 64

No comments

Sony SDZ-S100 User Manual Page 43