Sony STR-DN1010 User Manual download pdf (Page 81)

D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm masterpage: Right

STR-DN1010

4-174-068-11(1)

S-AIR Operations

8 Select the desired input on the

S-AIR receiver.

xWhen “Party” is set

The S-AIR receiver’s input changes

sequentially as you change the input on

the S-AIR main unit or S-AIR receiver.

xWhen “Separate” is set

The S-AIR receiver’s input changes by

pressing S-AIR CH of the S-AIR

receiver.

Note

When TUNER (FM/AM band) is selected on

the S-AIR main unit, you can only select the

same band for the tuner on the S-AIR receiver.

However, you can select input other than

TUNER on the S-AIR receiver.

9 Adjust the volume on the S-AIR

receiver.

* Models of area code U2, CA2 only.

Notes

• The sound of the S-AIR receiver may be cut off by

operation of the S-AIR main unit.

• When the sound is other than 2 channel stereo,

multi channel sound is downmixed to 2 channel.

• Signals with a sampling frequency of more than

96 kHz cannot output to the S-AIR receiver.

To control the system from the

S-AIR receiver

You can control the system from the S-AIR

receiver by using the following buttons.

For details, refer to the operating instructions

of the S-AIR receiver.

Changing the channel

for better sound

transmission

If you use multiple wireless systems which

share the 2.4 GHz band, such as wireless LAN

or Bluetooth, the transmission of S-AIR

products or other wireless systems may be

unstable. In this case, transmission may be

improved by changing the “RF Change”

setting.

1 Press GUI MODE.

After “MENU ON” appears on the

display for a while, “GUI” appears and

the GUI menu appears on the TV screen.

Press MENU if the GUI menu does not

appear on the TV screen.

2 Press V/v repeatedly to select

“Settings”, then press or b.

The Settings menu list appears on the TV

screen.

3 Press V/v repeatedly to select

“S-AIR”, then press or b.

Note

When the S-AIR transmitter (not supplied) is

not inserted into the S-AIR main unit, “S-AIR”

cannot be selected.

Press Operation

N, X, x,

./>

Share the same operations on the

remote

S-AIR CH Change the function of the

system

GUI MODE

V/v/b,

continued

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 135 136

Comments to this Manuals

No comments

Sony STR-DN1010 User Manual Page 81

Comments to this Manuals

Related products and manuals for AV receivers Sony STR-DN1010