Sony STR-DG510 User Manual download pdf (Page 28)

28

GB

7: Calibrating the

appropriate settings

automatically

(AUTO CALIBRATION)

The DCAC (Digital Cinema Auto Calibration)

function allows you to perform automatic

calibration such as:

• Checking the connection between each

speaker and the receiver.

• Adjusting the speaker level.

• Measuring the distance of each speaker from

your listening position.

You can also adjust the speaker levels and

balance manually. For details, see

“8: Adjusting the speaker levels and balance

(TEST TONE)” (page 31).

Before you perform Auto Calibration, install

and connect the speakers (page 14, 15).

• The AUTO CAL MIC jack is used for the

supplied optimizer microphone only. Do not

connect other microphones to this jack.

Doing so may damage the receiver and the

microphone.

• During calibration, the sound that comes out

of the speakers is very loud. Pay attention to

the presence of children or to the effect on

your neighborhood.

• Perform Auto Calibration in a quiet

environment to avoid the effect of noise and

to get a more accurate measurement.

• If there are any obstacles in the path between

the optimizer microphone and the speakers,

the calibration cannot be performed

correctly. Remove any obstacles from the

measurement area to avoid measurement

error.

Notes

• The Auto Calibration function does not work when

headphones are connected.

• Make sure SPEAKERS (OFF/A/B) is not set to off.

1 Connect the supplied optimizer

microphone to the AUTO CAL

MIC jack.

2 Set up the optimizer

microphone.

Place the optimizer microphone at your

listening position.You can also use a stool

or tripod so that the optimizer

microphone remains at the same height as

your ears.

Before you perform Auto

Calibration

?/1

AUTO CAL MIC

SPEAKERS

(OFF/A/B)

PHONES

MEMORY/

ENTER

TUNING

MODE

TUNING

2CH A.F.D. MOVIE MUSIC

AUTO CAL DIRECT

DISPLAY INPUT MODE

INPUT SELECTOR

MASTER VOLUME

Optimizer microphone

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 71 72

Comments to this Manuals

No comments